[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules

[Stefano Babic <sbabic@denx.de>]

On 03/04/2012 07:26, Gachet Daniel wrote:
> Hi Stefano,

Hi Daniel,

> 
> No problem, I will do it with the inverse logic, using a
> CONFIG_NAND_MXC_NFC_TWO_CYCLES, and adapt the tx25.h file. But could
> you tell me in which README file I should add the description for
> that switch? I have a look at all README, but no one has any
> description about NAND flash configuration flags (like
> CONFIG_NAND_MXC, CONFIG_NAND_MXC_V1_1  or CONFIG_MXC_NAND_HWECC).

You have found missing documentation ;-(. Maybe it was not checked
before, but you're right: there is no documentation for this driver.
Even worse, there is no "NAND Support" at all.

Please feel free to add a section. I think the right place is under "Low
Level (hardware related) configuration options", adding a part for the
MXC Nand driver. And if you want to integrate it with the missing
documentation for the other CONFIG_NAND_MXC options, it will be highly
appreciated.

Thanks,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================