[U-Boot] [PATCH v2 1/7] nand: Try to align the default buffers

[Scott Wood <scottwood@freescale.com>]

On 04/13/2012 01:29 PM, Simon Glass wrote:
> The NAND layer needs to use cache-aligned buffers by default. Towards this
> goal. align the default buffers and their members according to the minimum
> DMA alignment defined for the architecture.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
> Changes in v2:
> - Add new patch to align default buffers in nand_base
> 
>  drivers/mtd/nand/nand_base.c |    3 ++-
>  include/linux/mtd/nand.h     |    7 ++++---
>  2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 44f7b91..7bfc29e 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -2935,7 +2935,8 @@ int nand_scan_tail(struct mtd_info *mtd)
>  	struct nand_chip *chip = mtd->priv;
>  
>  	if (!(chip->options & NAND_OWN_BUFFERS))
> -		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
> +		chip->buffers = memalign(ARCH_DMA_MINALIGN,
> +					 sizeof(*chip->buffers));

This sort of requirement seems to be what NAND_OWN_BUFFERS was made for.

> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index da6fa18..ae0bdf6 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -391,9 +391,10 @@ struct nand_ecc_ctrl {
>   * consecutive order.
>   */
>  struct nand_buffers {
> -	uint8_t	ecccalc[NAND_MAX_OOBSIZE];
> -	uint8_t	ecccode[NAND_MAX_OOBSIZE];
> -	uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
> +	uint8_t	ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
> +	uint8_t	ecccode[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
> +	uint8_t databuf[ALIGN(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE,
> +			      ARCH_DMA_MINALIGN)];
>  };

I remember a while back someone wanting to change this to be pointers
intsead of arrays, so that the driver can manage alignment -- I don't
recall what happened to that.

-Scott