[U-Boot] usb ethernet working on panda?

[Gary Thomas <gary@mlbassoc.com>]

On 2012-02-28 23:17, Govindraj wrote:
> On Wed, Feb 29, 2012 at 4:47 AM, Kumar Gala<galak@kernel.crashing.org>  wrote:
>> Does anyone have usb ethernet working on top of git tree on a panda board?
>>
> yes.
>
>> If so any gotcha's or details on how you have it working.
>
> I use following commands:
>
> setenv usbethaddr 0:0:1:2:3:4;usb start;
>
> After Ethernet enumerates, from u-boot I use following bootargs
>
> setenv ipaddr xxx.xxx.xxx.xxx;setenv serverip xxx.xxx.xxx.xxx;setenv
> gatewayip xxx.xxx.xxx.xxx;setenv netmask xxx.xxx.xxx.xx;
> setenv bootfile xxxxxx;setenv bootcmd 'tftp 80300000;bootm 80300000';
> setenv bootargs console=ttyO2,115200n8 noinitrd root=/dev/nfs rw
> nfsroot=<path_to_fs>,nolock,tcp, wsize=1024,rsize=1024 ip=dhcp
> devfs=mount;
> boot;
>
> Ensure you have smsc95xx usb Ethernet adapter support in your kernel for
> nfs boot.

Is this against the main U-Boot git tree (git://git.denx.de/u-boot.git)?
If not, what tree/branch?

Thanks

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------