From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Mon, 16 Apr 2012 15:04:00 +0200 Subject: [U-Boot] [GIT PULL] Pull request: u-boot-imx In-Reply-To: <4F85939F.3010709@denx.de> References: <4F85939F.3010709@denx.de> Message-ID: <4F8C18C0.9010608@aribaud.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefano, Le 11/04/2012 16:22, Stefano Babic a ?crit : > Hi Albert, > > please pull from u-boot-imx. Note: I rebased on u-boot mainline, because > I needed some patches for testing that were merged by Wolfgang, and I > could not find in u-boot-arm. Let me know if this is a problem for you ;-) > > The following changes since commit 3f0675d1a532dbf1fd906103e4b61a6fb842c257: > > Merge branch 'marek.vasut at gmail.com' of > git://git.denx.de/u-boot-staging (2012-04-09 21:34:27 +0200) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-imx.git master > > Anatolij Gustschin (1): > ARM1136: add cache flush and invalidate operations > > Eric Nelson (3): > i.MX6: define CACHELINE_SIZE > i.MX6: implement enable_caches() > i.MX6: mx6qsabrelite: add cache commands if cache is enabled > > Fabio Estevam (4): > mx28: Split the README into a common part and a m28 specific part > mx28evk: Add a README file > mx6qsabrelite: Add boot switch setting information into the README > mx6qsabrelite: Fix the serial console port > > Marek Vasut (4): > i.MX28: Fix initial stack pointer position > i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC > DMA: Split the APBH DMA init into block and channel init > M28: Pull out CONFIG_APBH_DMA so it's always enabled > > Stefano Babic (7): > ARM: 926ejs: use debug() for misaligned addresses > mx35: flea3: fix when cache functions are linked > mx35: mx35pdk: fix when cache functions are linked > MX31: mx31pdk: drop enable_caches from board file > ARM: add u-boot.imx as target for i.MX SOCs > ARM1136: MX35: Make asm routines volatile in cache ops > MX35: mx35pdk: wrong board revision > > Troy Kisky (1): > MX53: DDR: Fix ZQHWCTRL field TZQ_CS > > Vikram Narayanan (4): > imx: Remove unneeded/repititive definitions from imx headers > imx: Add GPIO_TO_PORT macro in the mxc_gpio driver > imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio>> 5) > imx: Return gpio_set_value in gpio_direction_output > > arch/arm/cpu/arm1136/cpu.c | 103 ++++++++++++- > arch/arm/cpu/arm926ejs/cache.c | 2 +- > arch/arm/cpu/arm926ejs/mx28/mx28.c | 6 + > arch/arm/cpu/armv7/config.mk | 3 + > arch/arm/cpu/armv7/mx6/soc.c | 8 + > arch/arm/include/asm/arch-mx28/dma.h | 4 +- > arch/arm/include/asm/arch-mx35/mx35_pins.h | 2 - > arch/arm/include/asm/arch-mx5/mx5x_pins.h | 2 - > arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +- > board/freescale/mx31pdk/mx31pdk.c | 8 - > board/freescale/mx35pdk/mx35pdk.c | 11 -- > board/freescale/mx53ard/imximage_dd3.cfg | 2 +- > board/freescale/mx53evk/imximage.cfg | 2 +- > board/freescale/mx53loco/imximage.cfg | 2 +- > board/freescale/mx53smd/imximage.cfg | 2 +- > doc/README.m28 | 219 > +-------------------------- > doc/README.mx28_common | 226 > ++++++++++++++++++++++++++++ > doc/README.mx28evk | 29 ++++ > doc/README.mx6qsabrelite | 3 +- > drivers/dma/apbh_dma.c | 38 ++--- > drivers/gpio/mxc_gpio.c | 12 +- > drivers/mmc/mxsmmc.c | 53 +++++++- > drivers/mtd/nand/mxs_nand.c | 11 +- > include/configs/flea3.h | 2 + > include/configs/m28evk.h | 8 +- > include/configs/mx28evk.h | 2 +- > include/configs/mx35pdk.h | 3 +- > include/configs/mx6qarm2.h | 2 + > include/configs/mx6qsabrelite.h | 8 +- > 29 files changed, 492 insertions(+), 285 deletions(-) > create mode 100644 doc/README.mx28_common > create mode 100644 doc/README.mx28evk > > > Stefano Applied to u-boot-arm/master, thanks! Amicalement, -- Albert.