From mboxrd@z Thu Jan  1 00:00:00 1970
From: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Date: Tue, 17 Apr 2012 11:23:43 +0300
Subject: [U-Boot] MXS NAND: DMA read error
In-Reply-To: <201204171017.37983.marex@denx.de>
References: <4F8D24C0.9090106@bluegiga.com> <201204171017.37983.marex@denx.de>
Message-ID: <4F8D288F.8050206@bluegiga.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Marek,

On 04/17/2012 11:17 AM, Marek Vasut wrote:
>> I'm trying to compile latest U-Boot to mx28evk (rev D) with NAND
>> support. U-Boot boots up but NAND chip is not detected and DMA read
>> error is popped up.
>
> MX28 EVK has no NAND, right?

MX28 EVK has NAND slot and I have installed NAND chip on it. I'm using 
same chip with older pached U-Boot and Linux and chip is working fine 
with them.


> Otherwise, check if you have APBH DMA enabled in your include/configs/mx28evk.h

Config file include/configs/mx28evk.h has following line.

#define CONFIG_APBH_DMA


BR,
Lauri