[U-Boot] Missing ethernet

[Gary Thomas <gary@mlbassoc.com>]

On 2012-04-19 06:45, Gary Thomas wrote:
> I'm trying to update U-boot on my board from v2011.06 to v2011.12
> It's an OMAP 3530, much like the BeagleBoard, with SMSC911x networking.
> U-Boot is working fine on this board, but when I boot Linux, it can
> no longer find the SMSC device. If I boot the same kernel with the
> older U-Boot, the SMSC device works perfectly.
>
> I've looked through the 'bootm' path and I can't see what might
> have changed that would cause such behaviour. As far as I can
> tell, everything else is working in Linux with the new U-Boot,
> just not the SMSC device.
>
> Any clues?
>
> Thanks
>

Note: I've verified that it's also not working in v2012.04-rc1

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------