From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 20 Apr 2012 09:42:46 +0200 Subject: [U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port In-Reply-To: <20120419224234.GC19686@bill-the-cat> References: <1334870718-24065-1-git-send-email-jeroen@myspectrum.nl> <20120419224234.GC19686@bill-the-cat> Message-ID: <4F911376.1060104@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 20/04/2012 00:42, Tom Rini wrote: > On Thu, Apr 19, 2012 at 11:25:18PM +0200, Jeroen Hofstee wrote: >> This is just a patch for the problem reported here: >> http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor. >> >> "Looks like this is copy paste error from my side,(for port2/3 it should have been bypass >> for port2/3 rather its port1 set in bypass mode)" >> >> I only submit the patch since it is missing in 2012.04-rc3 while the twister board >> depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it. >> >> note: the twister boards still needs an additional `usb reset`, don't know why. > > > I don't see any difference between the first usb start and the following > resets, should there have been? Clearly, there's a problem, but lets > see if we can fix all of it in time.. Thanks! The issue was raised during the review of Govindraj's patch, it seems the wrong version was picked up. Acked-by : Stefano Babic Can you apply it for the release (this is clearly a fix) ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================