[U-Boot] [PATCH] i.MX6: Add ANATOP regulator init

[Dirk Behme <dirk.behme@de.bosch.com>]

Hi Stefano,

On 23.04.2012 11:55, Stefano Babic wrote:
> On 13/04/2012 10:00, Dirk Behme wrote:
>> Init the core regulator voltage to 1.2V. This is required for the correct
>> functioning of the GPU and when the ARM LDO is set to 1.225V. This is a
>> workaround to fix some memory clock jitter.
>>
>> Note: This should be but can't be done in the DCD. The bootloader
>>       prevents access to the ANATOP registers.
>>
>> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
>> CC: Jason Chen <b02280@freescale.com>
>> CC: Jason Liu <r64343@freescale.com>
>> CC: Ranjani Vaidyanathan <ra5478@freescale.com>
>> CC: Stefano Babic <sbabic@denx.de>
>> CC: Fabio Estevam <festevam@gmail.com>
>> ---
> 
> Hi Dirk,
> 
>> +static void init_anatop_reg(void)
>> +{
>> +	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
>> +	int reg = readl(&anatop->reg_core);
>> +
>> +	/*
>> +	 * Increase the VDDSOC to 1.2V
>> +	 * Mask out the REG_CORE[22:18] bits (REG2_TRIG)
>> +	 * and set them to 1.2V (0.7V + 0x14 * 0.025V)
>> +	 */
>> +	reg = (reg & ~(0x1F << 18)) | (0x14 << 18);
> 
> Everything clear, but what do you mind to add an accessor to set this
> voltage ? It is straightforward, and more boards could use it.

Sorry, but what do you mean with "add an accessor"? Could you give an 
example?

Best regards

Dirk