[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings

[Stefano Babic <sbabic@denx.de>]

On 28/04/2012 17:36, Eric Nelson wrote:
> Hi Dirk,
> 
> On 04/28/2012 07:51 AM, Dirk Behme wrote:
>> Hi Eric,
>>
>> On 26.04.2012 01:50, Eric Nelson wrote:
>>> Signed-off-by: Eric Nelson<eric.nelson@boundarydevices.com>
>>>
>>> ---
>>> V2 has been stripped of the board-independent changes and
>>> uses clrsetbits_le32() instead of twiddling bits by hand.
>>>
>>> V3 returns immediately from setup_sata() if enable_sata_clock()
>>> returns an error.
>>>
>>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 32
>>> +++++++++++++++++++++++++
>>> include/configs/mx6qsabrelite.h | 13 ++++++++++
>>> 2 files changed, 45 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>>> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>>> index 1d09a72..c9a108f 100644
>>> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>>> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
>>> @@ -25,6 +25,8 @@
>>> #include<asm/arch/imx-regs.h>
>>> #include<asm/arch/mx6x_pins.h>
>>> #include<asm/arch/iomux-v3.h>
>>> +#include<asm/arch/ccm_regs.h>
>>
>> Do we need ccm_regs.h here?
>>
> 
> Nope. Good catch.
> 
> I'll generate a V4 in a day or two to allow some other review.
> 
> Stefano, what's the status of the dwc_ahsata driver?

Hi Eric, hi Dirk,

I have merged the dwc_ahsata into the master branch, and the drive ris
available.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================