From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 29 Apr 2012 16:48:30 +0200 Subject: [U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings In-Reply-To: <4F9C0E88.5060404@boundarydevices.com> References: <1335397801-25967-1-git-send-email-eric.nelson@boundarydevices.com> <4F9C03F5.8030308@googlemail.com> <4F9C0E88.5060404@boundarydevices.com> Message-ID: <4F9D54BE.5000905@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 28/04/2012 17:36, Eric Nelson wrote: > Hi Dirk, > > On 04/28/2012 07:51 AM, Dirk Behme wrote: >> Hi Eric, >> >> On 26.04.2012 01:50, Eric Nelson wrote: >>> Signed-off-by: Eric Nelson >>> >>> --- >>> V2 has been stripped of the board-independent changes and >>> uses clrsetbits_le32() instead of twiddling bits by hand. >>> >>> V3 returns immediately from setup_sata() if enable_sata_clock() >>> returns an error. >>> >>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 32 >>> +++++++++++++++++++++++++ >>> include/configs/mx6qsabrelite.h | 13 ++++++++++ >>> 2 files changed, 45 insertions(+), 0 deletions(-) >>> >>> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> index 1d09a72..c9a108f 100644 >>> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> @@ -25,6 +25,8 @@ >>> #include >>> #include >>> #include >>> +#include >> >> Do we need ccm_regs.h here? >> > > Nope. Good catch. > > I'll generate a V4 in a day or two to allow some other review. > > Stefano, what's the status of the dwc_ahsata driver? Hi Eric, hi Dirk, I have merged the dwc_ahsata into the master branch, and the drive ris available. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================