From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 29 Apr 2012 18:46:43 +0200 Subject: [U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() In-Reply-To: <4F9D6FAA.6060402@googlemail.com> References: <1332279610-22838-1-git-send-email-fabio.estevam@freescale.com> <1332279610-22838-2-git-send-email-fabio.estevam@freescale.com> <4F98E580.6090809@de.bosch.com> <4F9D6FAA.6060402@googlemail.com> Message-ID: <4F9D7073.3000402@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 29/04/2012 18:43, Dirk Behme wrote: > Hi Stefano, > > On 29.04.2012 16:54, Fabio Estevam wrote: >> Hi Dirk, >> >> On Thu, Apr 26, 2012 at 3:04 AM, Dirk Behme >> wrote: >> >>> We had this patch on a v2012.04.1 based test branch and it showed some >>> strange issues with SD cards on i.MX6. >>> >>> Depending on the SD card used (different ones) and the board >>> (SabreLite and >>> a custom one) >>> >>> - the SD card just works fine as we are used to >>> - booting fails with "MMC init failed" >>> - booting fails with "Card did not respond to voltage select!" >>> >>> Reverting this patch on the test branch makes all tested boards and >>> tested >>> SD cards work fine again. >>> >>> I haven't looked into the details to debug the root cause, though. >>> >>> So for the moment: NACK >> >> Thanks for testing it. I found one mistake and will submit a fix shortly. > > I saw you have this patch already in > > http://git.denx.de/?p=u-boot/u-boot-imx.git;a=shortlog;h=refs/heads/maste Hi Dirk, thanks for raise my attention on this issue. I drop the patch from u-boot-imx Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================