* [U-Boot] USB ethernet on Panda
@ 2012-05-01 0:16 Gary Thomas
2012-05-01 0:24 ` Gary Thomas
0 siblings, 1 reply; 2+ messages in thread
From: Gary Thomas @ 2012-05-01 0:16 UTC (permalink / raw)
To: u-boot
I just built U-Boot 2012.04 for the OMAP4 PandaBoard, hoping that
the USB ethernet would work. Sadly, it does not - the board hangs
during the initial USB scan:
U-Boot 2012.04 (Apr 30 2012 - 18:08:55)
CPU : OMAP4430 ES2.2
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Panda # usb start
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices...
At this point, it's dead - ^C does not work, nor does the RESET button.
Any ideas how I can get this working?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] USB ethernet on Panda
2012-05-01 0:16 [U-Boot] USB ethernet on Panda Gary Thomas
@ 2012-05-01 0:24 ` Gary Thomas
0 siblings, 0 replies; 2+ messages in thread
From: Gary Thomas @ 2012-05-01 0:24 UTC (permalink / raw)
To: u-boot
On 2012-04-30 18:16, Gary Thomas wrote:
> I just built U-Boot 2012.04 for the OMAP4 PandaBoard, hoping that
> the USB ethernet would work. Sadly, it does not - the board hangs
> during the initial USB scan:
>
> U-Boot 2012.04 (Apr 30 2012 - 18:08:55)
>
> CPU : OMAP4430 ES2.2
> Board: OMAP4 Panda
> I2C: ready
> DRAM: 1 GiB
> MMC: OMAP SD/MMC: 0
> Using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: No ethernet found.
> Hit any key to stop autoboot: 0
> Panda # usb start
> (Re)start USB...
> USB: Register 1313 NbrPorts 3
> USB EHCI 1.00
> scanning bus for devices...
>
> At this point, it's dead - ^C does not work, nor does the RESET button.
>
> Any ideas how I can get this working?
>
Interestingly, I unplugged the USB hub I had connected (in addition
to the built-in SMSC95xx ethernet) and now it works. It seems that
the USB scanning code is not very happy with either the hub or the
mouse+keyboard I had attached. I'll try to look into this later; for
now I'm happy that I can use the ethernet.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-05-01 0:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-01 0:16 [U-Boot] USB ethernet on Panda Gary Thomas
2012-05-01 0:24 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox