From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 06 May 2012 17:47:58 +0200 Subject: [U-Boot] [PATCH 3/3] mx53loco: Add support for 1GHz operation for DA9053-based boards In-Reply-To: <1335809524-1994-3-git-send-email-festevam@gmail.com> References: <1335809524-1994-1-git-send-email-festevam@gmail.com> <1335809524-1994-3-git-send-email-festevam@gmail.com> Message-ID: <4FA69D2E.3020506@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 30/04/2012 20:12, Fabio Estevam wrote: > There are two types of mx53loco boards: initial boards were built with a Dialog > DA9053 PMIC and more recent version is based on a Freescale MC34708 PMIC. > > Add DA9053 PMIC support and adjust the required voltages and clocks for running > the CPU at 1GHz. > > Tested on both versions of mx53loco boards. > > In the case of a MC34708-based board the CPU operating voltage remains at 800MHz. > > Signed-off-by: Fabio Estevam Applied to u-boot-imx, thanks Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================