From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 06 May 2012 18:44:27 +0200 Subject: [U-Boot] [PATCH v2] i.MX6: Add ANATOP regulator init In-Reply-To: <1335960737-517-1-git-send-email-dirk.behme@de.bosch.com> References: <1335960737-517-1-git-send-email-dirk.behme@de.bosch.com> Message-ID: <4FA6AA6B.7060306@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/05/2012 14:12, Dirk Behme wrote: > Init the core regulator voltage to 1.2V. This is required for the correct > functioning of the GPU and when the ARM LDO is set to 1.225V. This is a > workaround to fix some memory clock jitter. > > Note: This should be but can't be done in the DCD. The bootloader > prevents access to the ANATOP registers. > > Signed-off-by: Dirk Behme > CC: Jason Chen > CC: Jason Liu > CC: Ranjani Vaidyanathan > CC: Stefano Babic > CC: Fabio Estevam > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================