From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4 7/8] i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
Date: Sun, 06 May 2012 19:21:37 +0200 [thread overview]
Message-ID: <4FA6B321.7040707@denx.de> (raw)
In-Reply-To: <1334825735-27992-8-git-send-email-timo@exertus.fi>
On 19/04/2012 10:55, Timo Ketola wrote:
> types.h must be included in imx-regs.h if one wants to include
> imx-regs.h in a board configuration file. That for one's part is
> necessary, if one wants to use addresses defined in imx-regs.h.
>
> For example, fsl_esdhc.c needs CONFIG_SYS_FSL_ESDHC_ADDR defined and
> a proper thing is to define it with IMX_MMC_SDHCx_BASE in board
> configuration file. This patch fixes the build in that case.
>
> Signed-off-by: Timo Ketola <timo@exertus.fi>
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-05-06 17:21 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-12 9:33 [U-Boot] [PATCH 0/8] i.MX25: Miscellaneus fixes Timo Ketola
2012-04-12 9:33 ` [U-Boot] [PATCH 1/8] i.MX25: add mxc_get_clock infrastructure Timo Ketola
2012-04-12 9:33 ` [U-Boot] [PATCH 2/8] i.MX: Add target flashable to offset 0 Timo Ketola
2012-04-12 11:11 ` Stefano Babic
2012-04-12 11:21 ` Timo Ketola
2012-04-12 9:33 ` [U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file Timo Ketola
2012-04-12 11:13 ` Stefano Babic
2012-04-12 11:24 ` Timo Ketola
2012-04-12 12:00 ` Stefano Babic
2012-04-12 12:04 ` Timo Ketola
2012-08-09 20:26 ` Wolfgang Denk
2012-08-13 5:43 ` Timo Ketola
2012-04-12 9:33 ` [U-Boot] [PATCH 4/8] i.MX25: Has a GPIO4 too Timo Ketola
2012-04-12 11:15 ` Stefano Babic
2012-04-12 12:10 ` Wolfgang Denk
2012-04-12 12:20 ` Timo Ketola
2012-04-12 13:09 ` Detlev Zundel
2012-04-13 4:58 ` Timo Ketola
2012-04-12 9:33 ` [U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Timo Ketola
2012-04-12 12:05 ` Stefano Babic
2012-04-12 13:16 ` Timo Ketola
2012-04-12 14:31 ` Stefano Babic
2012-04-12 12:12 ` Wolfgang Denk
2012-04-12 19:59 ` Troy Kisky
2012-04-12 20:12 ` Timo Ketola
2012-04-12 9:33 ` [U-Boot] [PATCH 6/8] i.MX25: Add Exertus EXE4026 board Timo Ketola
2012-04-12 10:43 ` Fabio Estevam
2012-04-12 10:57 ` Timo Ketola
2012-04-12 12:06 ` Stefano Babic
2012-04-12 12:09 ` Timo Ketola
2012-04-12 12:40 ` Stefano Babic
2012-04-12 9:33 ` [U-Boot] [PATCH 7/8] MXC NAND: Place BBT patterns into free OOB region Timo Ketola
2012-04-12 9:33 ` [U-Boot] [PATCH 8/8] i.MX25: This model has almost the same USB-controller as i.MX31 Timo Ketola
2012-04-13 11:20 ` [U-Boot] [PATCH 0/9 v2] i.MX25: Miscellaneus fixes Timo Ketola
2012-04-13 11:20 ` [U-Boot] [PATCH 1/9] i.MX25: esdhc: Add mxc_get_clock infrastructure Timo Ketola
2012-04-13 11:20 ` [U-Boot] [PATCH 2/9] i.MX25: This architecture has a GPIO4 too Timo Ketola
2012-04-13 11:20 ` [U-Boot] [PATCH 3/9] imx: fec: Resolve speed before configuring gasket Timo Ketola
2012-04-13 11:20 ` [U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Timo Ketola
2012-04-13 17:19 ` Scott Wood
2012-04-13 18:12 ` Timo Ketola
2012-04-13 18:17 ` Scott Wood
2012-04-13 18:39 ` Timo Ketola
2012-04-16 6:41 ` Timo Ketola
2012-04-16 14:43 ` Scott Wood
2012-04-13 11:20 ` [U-Boot] [PATCH 5/9] i.MX25: This architecture has almost the same USB-controller as i.MX31 Timo Ketola
2012-04-13 11:20 ` [U-Boot] [PATCH 6/9] imx: usb: There is no such register Timo Ketola
2012-04-13 11:20 ` [U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
2012-04-13 11:21 ` [U-Boot] [PATCH 8/9] imx: nand: Don't invent new configuration variable Timo Ketola
2012-04-13 17:21 ` Scott Wood
2012-04-13 18:28 ` Timo Ketola
2012-04-13 11:21 ` [U-Boot] [PATCH 9/9] imx: Add u-boot.imx as target for ARM9 i.MX SOCs Timo Ketola
2012-04-18 7:57 ` [U-Boot] [PATCH 0/8 v3] i.MX25: Miscellaneus fixes Timo Ketola
2012-04-18 7:57 ` [U-Boot] [PATCH 1/9] i.MX25: esdhc: Add mxc_get_clock infrastructure Timo Ketola
2012-04-18 9:23 ` Wolfgang Denk
2012-04-18 10:42 ` Timo Ketola
2012-04-18 7:57 ` [U-Boot] [PATCH 2/9] i.MX25: This architecture has a GPIO4 too Timo Ketola
2012-04-18 7:57 ` [U-Boot] [PATCH 3/9] imx: fec: Resolve speed before configuring gasket Timo Ketola
2012-04-18 7:57 ` [U-Boot] [PATCH 4/9] imx: nand: Support flash based BBT Timo Ketola
2012-04-18 16:30 ` Scott Wood
2012-04-18 7:57 ` [U-Boot] [PATCH 5/9] i.MX25: This architecture has almost the same USB-controller as i.MX31 Timo Ketola
2012-04-18 7:57 ` [U-Boot] [PATCH 6/9] imx: usb: There is no such register Timo Ketola
2012-04-18 9:05 ` Stefano Babic
2012-04-18 9:15 ` Timo Ketola
2012-04-18 10:32 ` Stefano Babic
2012-04-18 7:57 ` [U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
2012-04-18 8:43 ` Stefano Babic
2012-04-18 9:11 ` Timo Ketola
2012-04-18 10:30 ` Stefano Babic
2012-04-18 11:05 ` Timo Ketola
2012-04-18 15:05 ` Stefano Babic
2012-04-18 16:27 ` Timo Ketola
2012-04-18 16:59 ` Timo Ketola
2012-04-18 7:57 ` [U-Boot] [PATCH 8/9] imx: Add u-boot.imx as target for ARM9 i.MX SOCs Timo Ketola
2012-04-18 8:13 ` [U-Boot] [PATCH 0/8 v3] i.MX25: Miscellaneus fixes Timo Ketola
2012-04-18 8:40 ` Stefano Babic
2012-04-19 8:55 ` [U-Boot] [PATCH V4 0/8] i.MX25: Preparing new board with miscellaneus fixes Timo Ketola
2012-04-19 8:55 ` [U-Boot] [PATCH V4 1/8] i.MX25: esdhc: Add mxc_get_clock infrastructure Timo Ketola
2012-04-19 16:15 ` Stefano Babic
2012-05-06 17:24 ` Stefano Babic
2012-04-19 8:55 ` [U-Boot] [PATCH V4 2/8] i.MX25: This architecture has a GPIO4 too Timo Ketola
2012-04-19 16:17 ` Stefano Babic
2012-05-06 17:17 ` Stefano Babic
2012-04-19 8:55 ` [U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Timo Ketola
2012-04-19 16:16 ` Stefano Babic
2012-04-19 19:27 ` Troy Kisky
2012-04-19 20:18 ` Timo Ketola
2012-04-19 21:13 ` Troy Kisky
2012-04-19 21:23 ` Troy Kisky
2012-04-20 4:35 ` Timo Ketola
2012-04-20 7:30 ` Stefano Babic
2012-04-20 8:54 ` Timo Ketola
2012-04-23 7:55 ` Stefano Babic
2012-04-23 8:17 ` Timo Ketola
2012-04-19 21:28 ` Troy Kisky
2012-04-20 4:25 ` Timo Ketola
2012-04-19 8:55 ` [U-Boot] [PATCH V4 4/8] imx: nand: Support flash based BBT Timo Ketola
2012-04-19 15:27 ` Scott Wood
2012-05-06 17:18 ` Stefano Babic
2012-04-19 8:55 ` [U-Boot] [PATCH V4 5/8] i.MX25: usb: Set PORTSCx register Timo Ketola
2012-04-19 16:16 ` Stefano Babic
2012-05-01 19:46 ` Marek Vasut
2012-05-06 17:19 ` Stefano Babic
2012-04-19 8:55 ` [U-Boot] [PATCH V4 6/8] imx: usb: There is no such register Timo Ketola
2012-04-19 16:17 ` Stefano Babic
2012-05-06 17:20 ` Stefano Babic
2012-04-19 8:55 ` [U-Boot] [PATCH V4 7/8] i.MX2: Include asm/types.h in arch-mx25/imx-regs.h Timo Ketola
2012-04-19 16:17 ` Stefano Babic
2012-05-06 17:21 ` Stefano Babic [this message]
2012-04-19 8:55 ` [U-Boot] [PATCH V4 8/8] imx: Add u-boot.imx as target for ARM9 i.MX SOCs Timo Ketola
2012-04-19 16:17 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA6B321.7040707@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox