[U-Boot] uboot and ZFS

[Jorgen Lundman <lundman@lundman.net>]

> If you correctly skip the HW init, you can try booting u-boot from u-boot ...
> (now, WD will hate me for bringing this up :-) ). It's possible, but unsupported
> operation. You might need to do some research on this matter :-)
>

I was thinking more along the lines of;  Since I am testing a filesystem 
driver, to have a small test binary I can run and just feed a patch to (be 
it block device, or raw file) to test it can traverse, and read the contents.

But it would not be so bad to simulate that with some #ifdefs I guess.


>> What is the general patch acceptance around, I see ext4 wasn't accepted,
>> what are the chances my patches would be?
>
> Why wasn't ext4 accepted?

I have no idea. I found the patches back in Dec, and it is not in the 
repository. Although, I have patched it into my tree on github, it might 
help merging it into uboot. It does appear to work, whereas my zfs does not :)

CuBox>> zfsls usb 0:2
** Bad partition - usb 0:2 **
CuBox>> zfsls usb 0:1
** Bad partition - usb 0:1 **
CuBox>> zfsls usb 0:0
data abort
pc : [<0063ea0c>]          lr : [<0060eef0>]
sp : 005ffe40  ip : 00000000     fp : 00000000
r10: 00000000  r9 : 00652a4c     r8 : 005fffcc
r7 : 00000000  r6 : 00000000     r5 : 007104b0  r4 : 006444a7
r3 : 00000000  r2 : 006f7b80     r1 : 00000000  r0 : ea000012
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

Dang :)

Lund

-- 
Jorgen Lundman       | <lundman@lundman.net>
Unix Administrator   | +81 (0)3 -5456-2687 ext 1017 (work)
Shibuya-ku, Tokyo    | +81 (0)90-5578-8500          (cell)
Japan                | +81 (0)3 -3375-1767          (home)