From: Dirk Behme <dirk.behme@de.bosch.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] imx-common: Factor out get_ahb_clk()
Date: Tue, 8 May 2012 09:04:21 +0200 [thread overview]
Message-ID: <4FA8C575.5060907@de.bosch.com> (raw)
In-Reply-To: <1335723073-13421-1-git-send-email-festevam@gmail.com>
On 29.04.2012 20:11, Fabio Estevam wrote:
> get_ahb_clk() is a common function between mx5 and mx6.
>
> Place it into imx-common directory.
>
> Cc: Dirk Behme <dirk.behme@googlemail.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Booting this on the SabreLite with different SD cards looks fine. So:
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
> ---
> Changes since v1: Do not use weak definition for get_periph_clk()
>
> arch/arm/cpu/armv7/imx-common/cpu.c | 13 +++++++++++++
> arch/arm/cpu/armv7/mx5/clock.c | 19 ++-----------------
> arch/arm/cpu/armv7/mx6/clock.c | 19 ++++---------------
> arch/arm/include/asm/arch-mx5/sys_proto.h | 2 ++
> .../asm/arch-mx6/{ccm_regs.h => crm_regs.h} | 2 +-
> arch/arm/include/asm/arch-mx6/sys_proto.h | 3 ++-
> 6 files changed, 24 insertions(+), 34 deletions(-)
> rename arch/arm/include/asm/arch-mx6/{ccm_regs.h => crm_regs.h} (99%)
>
> diff --git a/arch/arm/cpu/armv7/imx-common/cpu.c b/arch/arm/cpu/armv7/imx-common/cpu.c
> index 3d58d8a..b96fa5b 100644
> --- a/arch/arm/cpu/armv7/imx-common/cpu.c
> +++ b/arch/arm/cpu/armv7/imx-common/cpu.c
> @@ -29,6 +29,7 @@
> #include <asm/arch/imx-regs.h>
> #include <asm/arch/clock.h>
> #include <asm/arch/sys_proto.h>
> +#include <asm/arch/crm_regs.h>
>
> #ifdef CONFIG_FSL_ESDHC
> #include <fsl_esdhc.h>
> @@ -127,3 +128,15 @@ void reset_cpu(ulong addr)
> {
> __raw_writew(4, WDOG1_BASE_ADDR);
> }
> +
> +u32 get_ahb_clk(void)
> +{
> + struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
> + u32 reg, ahb_podf;
> +
> + reg = __raw_readl(&imx_ccm->cbcdr);
> + reg &= MXC_CCM_CBCDR_AHB_PODF_MASK;
> + ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET;
> +
> + return get_periph_clk() / (ahb_podf + 1);
> +}
> diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
> index d769a4d..903e207 100644
> --- a/arch/arm/cpu/armv7/mx5/clock.c
> +++ b/arch/arm/cpu/armv7/mx5/clock.c
> @@ -30,6 +30,7 @@
> #include <asm/arch/crm_regs.h>
> #include <asm/arch/clock.h>
> #include <div64.h>
> +#include <asm/arch/sys_proto.h>
>
> enum pll_clocks {
> PLL1_CLOCK = 0,
> @@ -192,7 +193,7 @@ u32 get_mcu_main_clk(void)
> /*
> * Get the rate of peripheral's root clock.
> */
> -static u32 get_periph_clk(void)
> +u32 get_periph_clk(void)
> {
> u32 reg;
>
> @@ -213,22 +214,6 @@ static u32 get_periph_clk(void)
> }
>
> /*
> - * Get the rate of ahb clock.
> - */
> -static u32 get_ahb_clk(void)
> -{
> - uint32_t freq, div, reg;
> -
> - freq = get_periph_clk();
> -
> - reg = __raw_readl(&mxc_ccm->cbcdr);
> - div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
> - MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
> -
> - return freq / div;
> -}
> -
> -/*
> * Get the rate of ipg clock.
> */
> static u32 get_ipg_clk(void)
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index ef98563..0f05432 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -24,8 +24,9 @@
> #include <asm/io.h>
> #include <asm/errno.h>
> #include <asm/arch/imx-regs.h>
> -#include <asm/arch/ccm_regs.h>
> +#include <asm/arch/crm_regs.h>
> #include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
>
> enum pll_clocks {
> PLL_SYS, /* System PLL */
> @@ -34,7 +35,7 @@ enum pll_clocks {
> PLL_ENET, /* ENET PLL */
> };
>
> -struct imx_ccm_reg *imx_ccm = (struct imx_ccm_reg *)CCM_BASE_ADDR;
> +struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
>
> void enable_usboh3_clk(unsigned char enable)
> {
> @@ -92,7 +93,7 @@ static u32 get_mcu_main_clk(void)
> return freq / (reg + 1);
> }
>
> -static u32 get_periph_clk(void)
> +u32 get_periph_clk(void)
> {
> u32 reg, freq = 0;
>
> @@ -139,18 +140,6 @@ static u32 get_periph_clk(void)
> return freq;
> }
>
> -
> -static u32 get_ahb_clk(void)
> -{
> - u32 reg, ahb_podf;
> -
> - reg = __raw_readl(&imx_ccm->cbcdr);
> - reg &= MXC_CCM_CBCDR_AHB_PODF_MASK;
> - ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET;
> -
> - return get_periph_clk() / (ahb_podf + 1);
> -}
> -
> static u32 get_ipg_clk(void)
> {
> u32 reg, ipg_podf;
> diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h
> index 13d12ee..3f10d29 100644
> --- a/arch/arm/include/asm/arch-mx5/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx5/sys_proto.h
> @@ -35,5 +35,7 @@ void set_chipselect_size(int const);
> */
>
> int fecmxc_initialize(bd_t *bis);
> +u32 get_ahb_clk(void);
> +u32 get_periph_clk(void);
>
> #endif
> diff --git a/arch/arm/include/asm/arch-mx6/ccm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
> similarity index 99%
> rename from arch/arm/include/asm/arch-mx6/ccm_regs.h
> rename to arch/arm/include/asm/arch-mx6/crm_regs.h
> index 4af0b90..0e605c2 100644
> --- a/arch/arm/include/asm/arch-mx6/ccm_regs.h
> +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
> @@ -20,7 +20,7 @@
> #ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__
> #define __ARCH_ARM_MACH_MX6_CCM_REGS_H__
>
> -struct imx_ccm_reg {
> +struct mxc_ccm_reg {
> u32 ccr; /* 0x0000 */
> u32 ccdr;
> u32 csr;
> diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
> index 668e77a..69687a8 100644
> --- a/arch/arm/include/asm/arch-mx6/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
> @@ -34,5 +34,6 @@ u32 get_cpu_rev(void);
> */
>
> int fecmxc_initialize(bd_t *bis);
> -
> +u32 get_ahb_clk(void);
> +u32 get_periph_clk(void);
> #endif
next prev parent reply other threads:[~2012-05-08 7:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-20 21:40 [U-Boot] [PATCH 1/5] pmic: Add support for the Dialog DA9053 PMIC Fabio Estevam
2012-03-20 21:40 ` [U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() Fabio Estevam
2012-04-26 6:04 ` Dirk Behme
2012-04-29 14:54 ` Fabio Estevam
2012-04-29 16:26 ` Fabio Estevam
2012-04-29 18:15 ` Fabio Estevam
2012-05-06 16:33 ` Fabio Estevam
2012-04-29 16:43 ` Dirk Behme
2012-04-29 16:46 ` Stefano Babic
2012-04-29 18:11 ` [U-Boot] [PATCH v2] " Fabio Estevam
2012-05-08 7:04 ` Dirk Behme [this message]
2012-03-20 21:40 ` [U-Boot] [PATCH 3/5] mx5: Add clock config interface Fabio Estevam
2012-04-03 22:13 ` Fabio Estevam
2012-04-04 7:46 ` Stefano Babic
2012-03-20 21:40 ` [U-Boot] [PATCH 4/5] mx53loco: Allow to print CPU information at a later stage Fabio Estevam
2012-03-20 21:40 ` [U-Boot] [PATCH 5/5] mx53loco: Add support for 1GHz operation for DA9053-based boards Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA8C575.5060907@de.bosch.com \
--to=dirk.behme@de.bosch.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox