From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 09 May 2012 11:11:48 +0200 Subject: [U-Boot] [PATCH 3/4] mx53loco: Turn on VUSB regulator In-Reply-To: <1336422361-14245-3-git-send-email-festevam@gmail.com> References: <1336422361-14245-1-git-send-email-festevam@gmail.com> <1336422361-14245-3-git-send-email-festevam@gmail.com> Message-ID: <4FAA34D4.9050809@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 07/05/2012 22:26, Fabio Estevam wrote: > From: Fabio Estevam > > On the mx53loco board with mc34708 PMIC it is necessary to turn on VUSB regulator > so that the mx53 USBH1 PHY receives the 3.3V voltage. > > Tested by inserting a USB pen drive in the upper USB slot (USBH1) and then issued the > commands: > > usb start > > usb info > > ,which correctly detected and printed the USB pen drive information. > > Signed-off-by: Fabio Estevam > --- Acked-by: Stefano Babic Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================