From: Dirk Behme <dirk.behme@de.bosch.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs
Date: Tue, 15 May 2012 14:39:34 +0200 [thread overview]
Message-ID: <4FB24E86.5010509@de.bosch.com> (raw)
In-Reply-To: <1329906281-15180-2-git-send-email-sbabic@denx.de>
On 22.02.2012 11:24, Stefano Babic wrote:
> Signed-off-by: Stefano Babic <sbabic@denx.de>
> CC: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> drivers/net/fec_mxc.c | 5 +++++
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index 1fdd071..201e5d2 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -419,8 +419,13 @@ static int fec_open(struct eth_device *edev)
> while (readw(&fec->eth->miigsk_enr) & MIIGSK_ENR_READY)
> udelay(2);
>
> +#if !defined(CONFIG_MII)
> /* configure gasket for RMII, 50 MHz, no loopback, and no echo */
> writew(MIIGSK_CFGR_IF_MODE_RMII, &fec->eth->miigsk_cfgr);
> +#else
> + /* configure gasket for MII, no loopback, and no echo */
> + writew(MIIGSK_CFGR_IF_MODE_MII, &fec->eth->miigsk_cfgr);
> +#endif
>
> /* re-enable the gasket */
> writew(MIIGSK_ENR_EN, &fec->eth->miigsk_enr);
I have this patch on my list of pending patches.
What's the status of this?
Best regards
Dirk
next prev parent reply other threads:[~2012-05-15 12:39 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-22 10:24 [U-Boot] [PATCH 1/9] Define UART4 and UART5 base addresses Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs Stefano Babic
2012-05-15 12:39 ` Dirk Behme [this message]
2012-06-12 17:02 ` Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 3/9] NET: fec_mxc.c: Add a way to disable auto negotiation Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 4/9] MX5: Add definitions for SATA controller Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 5/9] SATA: check for return value from sata functions Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 6/9] MX53: add function to set SATA clock to internal Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 7/9] SATA: add driver for MX5 / MX6 SOCs Stefano Babic
2012-02-22 10:24 ` [U-Boot] [PATCH 8/9] MX53: Add support to ESG ima3 board Stefano Babic
2012-02-22 10:30 ` Dirk Behme
2012-02-22 10:46 ` Stefano Babic
2012-02-22 11:46 ` Dirk Behme
2012-02-22 10:24 ` [U-Boot] [PATCH 9/9] MX53: mx53loco: Add SATA support Stefano Babic
2012-02-23 15:40 ` Jason Hui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB24E86.5010509@de.bosch.com \
--to=dirk.behme@de.bosch.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox