[U-Boot] [PATCH] tegra: trimslice: fix a couple typos

[Igor Grinberg <grinberg@compulab.co.il>]

On 05/30/12 19:45, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
> 
> Fix the .dts file USB unit addresses not to duplicate each-other.
> 
> Fix the board name string to indicate the vendor is Compulab not NVIDIA.
> 
> Signed-off-by: Stephen Warren <swarren@nvidia.com>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Thanks!

> ---
>  board/compulab/dts/tegra2-trimslice.dts |    2 +-
>  include/configs/trimslice.h             |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/compulab/dts/tegra2-trimslice.dts b/board/compulab/dts/tegra2-trimslice.dts
> index c707eb8..db79e77 100644
> --- a/board/compulab/dts/tegra2-trimslice.dts
> +++ b/board/compulab/dts/tegra2-trimslice.dts
> @@ -47,7 +47,7 @@
>  		status = "disabled";
>  	};
>  
> -	usb at c5004000 {
> +	usb at c5000000 {
>  		status = "disabled";
>  	};
>  
> diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
> index dec9125..39c9866 100644
> --- a/include/configs/trimslice.h
> +++ b/include/configs/trimslice.h
> @@ -34,7 +34,7 @@
>  
>  /* High-level configuration options */
>  #define V_PROMPT		"Tegra2 (TrimSlice) # "
> -#define CONFIG_TEGRA2_BOARD_STRING	"NVIDIA Trimslice"
> +#define CONFIG_TEGRA2_BOARD_STRING	"Compulab Trimslice"
>  
>  /* Board-specific serial config */
>  #define CONFIG_SERIAL_MULTI

-- 
Regards,
Igor.