From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 12 Jun 2012 19:05:55 +0200 Subject: [U-Boot] [PATCH] i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly In-Reply-To: <1334143082-7876-1-git-send-email-jason.hui@linaro.org> References: <1334143082-7876-1-git-send-email-jason.hui@linaro.org> Message-ID: <4FD776F3.3060003@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/04/2012 13:18, Jason Liu wrote: > If one PAD does not have mux or pad config register, we need > set the NO_MUX_I/NO_PAD_I to 0, the old value is not correct > > Signed-off-by: Jason Liu > CC: Stefano Babic > --- > arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h > index afaa068..9979651 100644 > --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h > +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h > @@ -48,8 +48,8 @@ > #define PAD_CTL_SRE_FAST (1 << 0) > #define PAD_CTL_SRE_SLOW (0 << 0) > > -#define NO_MUX_I 0x3FF > -#define NO_PAD_I 0x7FF > +#define NO_MUX_I 0 > +#define NO_PAD_I 0 > > enum { > MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0), Applied to u-boot-imx, thanks. Sorry that it was not applied before ;-) Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================