From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/9]EXYNOS5: Support for Exynos5250 Rev 1.0
Date: Thu, 21 Jun 2012 09:01:39 +0900 [thread overview]
Message-ID: <4FE26463.5060009@samsung.com> (raw)
In-Reply-To: <1340188810-18871-1-git-send-email-rajeshwari.s@samsung.com>
Hi Rajeshwari,
On 06/20/2012 07:40 PM, Rajeshwari Shinde wrote:
> This patch set adds support for Exynos5250 Rev 1.0.
> Exynos5250 Rev 1.0 supports DDR3 Memory configuration and
> support for LPDDR2 is removed.
> Exynos5250 Rev 1.0 supports DWMMC driver but the support for same is
> not yet gone into Mainline. After DWMMC driver is added to Mainline
> support for generic S5P MMC driver will be removed.
>
> Due to Support of generic S5P MMC driver currently still being there in the
> Mainline you can see the following error on boot.
>
> mmc_reset: timeout error
> mmc_change_clock: timeout error
> mmc_send_cmd: waiting for status update
> MMC init failed
Is this error produced at exynos5, otherwise all samsung-soc?
I didn't understand why explain mmc issue in these patch series..
Best Regards,
Jaehoon Chung
>
> Rajeshwari Shinde (9):
> ARCH: SPL: Add parametric board initializer
> SMDK5250: SPL: Define parametric board initializer
> SMDK5250: Add smdk5250-uboot-spl.lds
> EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev
> 1.0
> EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
> Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0
> EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
> EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
> SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
>
> arch/arm/cpu/armv7/exynos/clock.c | 12 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 18 +-
> arch/arm/include/asm/arch-exynos/clock.h | 37 +-
> arch/arm/include/asm/arch-exynos/dmc.h | 65 +++
> arch/arm/include/asm/arch-exynos/spl.h | 95 +++
> board/samsung/smdk5250/Makefile | 3 +-
> board/samsung/smdk5250/clock_init.c | 714 +++++++++++++++++++----
> board/samsung/smdk5250/clock_init.h | 149 +++++
> board/samsung/smdk5250/dmc_common.c | 199 +++++++
> board/samsung/smdk5250/dmc_init.c | 462 ---------------
> board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++++++
> board/samsung/smdk5250/setup.h | 765 +++++++++++++++----------
> board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 +++
> board/samsung/smdk5250/smdk5250.c | 6 +-
> board/samsung/smdk5250/smdk5250_spl.c | 68 +++
> include/configs/smdk5250.h | 7 +-
> 16 files changed, 1968 insertions(+), 926 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-exynos/spl.h
> create mode 100644 board/samsung/smdk5250/clock_init.h
> create mode 100644 board/samsung/smdk5250/dmc_common.c
> delete mode 100644 board/samsung/smdk5250/dmc_init.c
> create mode 100644 board/samsung/smdk5250/dmc_init_ddr3.c
> create mode 100644 board/samsung/smdk5250/smdk5250-uboot-spl.lds
> create mode 100644 board/samsung/smdk5250/smdk5250_spl.c
>
next prev parent reply other threads:[~2012-06-21 0:01 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-20 10:40 [U-Boot] [PATCH 0/9]EXYNOS5: Support for Exynos5250 Rev 1.0 Rajeshwari Shinde
2012-06-20 10:40 ` [U-Boot] [PATCH 1/9] ARCH: SPL: Add parametric board initializer Rajeshwari Shinde
2012-06-20 10:40 ` [U-Boot] [PATCH 2/9] SMDK5250: SPL: Define " Rajeshwari Shinde
2012-06-20 10:40 ` [U-Boot] [PATCH 3/9] SMDK5250: Add smdk5250-uboot-spl.lds Rajeshwari Shinde
2012-06-20 10:40 ` [U-Boot] [PATCH 4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 Rajeshwari Shinde
2012-06-21 4:55 ` Joonyoung Shim
2012-06-21 5:26 ` Rajeshwari Birje
2012-06-20 10:40 ` [U-Boot] [PATCH 5/9] EXYNOS5: CLOCK: Add clock support " Rajeshwari Shinde
2012-06-20 10:40 ` [U-Boot] [PATCH 6/9] Exynos5: DDR3: Adding the DDR3 memory setup " Rajeshwari Shinde
2012-06-20 10:40 ` [U-Boot] [PATCH 7/9] EXYNOS5: CLOCK: Modify MPLL clock out " Rajeshwari Shinde
2012-06-21 5:01 ` Joonyoung Shim
2012-06-20 10:40 ` [U-Boot] [PATCH 8/9] EXYNOS5 : Modify pinnumx settings as per " Rajeshwari Shinde
2012-06-20 10:40 ` [U-Boot] [PATCH 9/9] SMDK5250: Enable UART and MMC for " Rajeshwari Shinde
2012-06-21 0:01 ` Jaehoon Chung [this message]
2012-06-29 7:26 ` [U-Boot] [PATCH 0/9]EXYNOS5: Support " Rajeshwari Birje
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE26463.5060009@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox