[U-Boot] [PATCH 18/24] mxc_i2c.c: finish adding CONFIG_I2C_MULTI_BUS support

[Troy Kisky <troy.kisky@boundarydevices.com>]

On 6/22/2012 10:09 AM, Marek Vasut wrote:
> Dear Troy Kisky,
>
>> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
>> ---
>>   drivers/i2c/mxc_i2c.c |   17 +++++++++++++++++
>>   1 file changed, 17 insertions(+)
>>
>> diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
>> index 339bb6f..5d18752 100644
>> --- a/drivers/i2c/mxc_i2c.c
>> +++ b/drivers/i2c/mxc_i2c.c
>> @@ -407,6 +407,23 @@ static void toggle_i2c(void *base)
>>   		p->toggle_fn(p->toggle_data);
>>   }
>>
>> +#ifdef CONFIG_I2C_MULTI_BUS
>> +unsigned int i2c_get_bus_num(void)
>> +{
>> +	return g_bus;
> Is this global variable? If so, it won't work before relocation. And i2c can be
> enabled before relocation.

Correct and correct. If you need i2c working before relocation, you 
cannot enable MULTI_BUS.

Should I put this in struct global_data to remove this restriction?

>
>> +}
>> +
>> +int i2c_set_bus_num(unsigned bus_idx)
>> +{
>> +	if (bus_idx >= ARRAY_SIZE(g_parms))
>> +		return -1;
>> +	if (!g_parms[bus_idx].base)
>> +		return -1;
>> +	g_bus = bus_idx;
>> +	return 0;
>> +}
>> +#endif
>> +
>>   int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
>>   {
>>   	return bus_i2c_read(get_base(), chip, addr, alen, buf, len);
> Best regards,
> Marek Vasut
>