[U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC

[Bo Shen <voice.shen@atmel.com>]

Hi Marek,

On 6/25/2012 10:57, Marek Vasut wrote:
> Dear Bo Shen,
>
>> Hi Marek,
>>
>> On 6/21/2012 18:17, Marek Vasut wrote:
>>> Dear Bo Shen,
>>>
>>>> Some Atmel SoC support USB EHCI, add the EHCI driver to support it.
>>>>
>>>> To enable the USB EHCI, add the following configuration options into
>>>> board relative configuration file and remove USB OHCI options.
>>>>
>>>>     #define CONFIG_USB_EHCI
>>>>     #define CONFIG_USB_EHCI_ATMEL
>>>>     #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
>>>>
>>>> Signed-off-by: Bo Shen<voice.shen@atmel.com>
>>>> ---

[...]

>>> btw do you have some user for this code?
>>
>> The at91sam9m10g45ek now uses OHCI, if needed, it can use EHCI. New
>> coming boards will use EHCI.
>
> When do you see such board appearing please?

   The at91sam9m10g45ek board has existed in mainline. As to AT91 
maintainer has no response, so I just send the EHCI driver separately.

   For new boards, I have submitted some patches (Please take the link 
as a reference: http://patchwork.ozlabs.org/patch/160581/), but AT91 
maintainer has no response and also, not others response.

BRs,
Bo Shen

>
>>> Best regards,
>>> Marek Vasut
>
> Best regards,
> Marek Vasut