From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tetsuyuki Kobayashi Date: Mon, 25 Jun 2012 21:40:57 +0900 Subject: [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code Message-ID: <4FE85C59.1010400@kmckk.co.jp> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Interrupts and exceptions doesn't work in relocated code. It badly use IRQ_STACK_START_IN in rom area as interrupt stack. It is because the vecotr table is not moved to ram area. This patch moves vector table before jumping relocated code. Signed-off-by: Tetsuyuki Kobayashi --- arch/arm/cpu/armv7/start.S | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 52f7f6e..5098f7b 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -277,6 +277,18 @@ jump_2_ram: mcr p15, 0, r0, c7, c10, 4 @ DSB mcr p15, 0, r0, c7, c5, 4 @ ISB #endif +/* + * Move vector table + */ +#if !defined(CONFIG_TEGRA2) +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) + /* Set vector address in CP15 VBAR register */ + ldr r0, =_start + add r0, r0, r9 + mcr p15, 0, r0, c12, c0, 0 @Set VBAR +#endif +#endif /* !Tegra2 */ + ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -- 1.7.9.5