[U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC

[Bo Shen <voice.shen@atmel.com>]

Hi Marek,

On 6/25/2012 21:07, Marek Vasut wrote:
> Dear Bo Shen,
>
>> Hi Marek,
>>
>> On 6/25/2012 10:57, Marek Vasut wrote:
>>> Dear Bo Shen,
>>>
>>>> Hi Marek,
>>>>
>>>> On 6/21/2012 18:17, Marek Vasut wrote:
>>>>> Dear Bo Shen,
>>>>>
>>>>>> Some Atmel SoC support USB EHCI, add the EHCI driver to support it.
>>>>>>
>>>>>> To enable the USB EHCI, add the following configuration options into
>>>>>> board relative configuration file and remove USB OHCI options.
>>>>>>
>>>>>>      #define CONFIG_USB_EHCI
>>>>>>      #define CONFIG_USB_EHCI_ATMEL
>>>>>>      #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
>>>>>>
>>>>>> Signed-off-by: Bo Shen<voice.shen@atmel.com>
>>>>>> ---
>>
>> [...]
>>
>>>>> btw do you have some user for this code?
>>>>
>>>> The at91sam9m10g45ek now uses OHCI, if needed, it can use EHCI. New
>>>> coming boards will use EHCI.
>>>
>>> When do you see such board appearing please?
>>
>>     The at91sam9m10g45ek board has existed in mainline. As to AT91
>> maintainer has no response, so I just send the EHCI driver separately.
>
> I think there're some issues with the at91 maintainer. Ccing Andreas, maybe he
> can actually start picking up the atmel patches?
>
>>     For new boards, I have submitted some patches (Please take the link
>> as a reference: http://patchwork.ozlabs.org/patch/160581/), but AT91
>> maintainer has no response and also, not others response.
>
> And CCing Albert so he can pick it up. But it'd be great if you also added some
> user of this code, so it's not completely dead.

OK, I will send out the v2 patches.
Thanks

>
>> BRs,
>> Bo Shen
>>
>>>>> Best regards,
>>>>> Marek Vasut
>>>
>>> Best regards,
>>> Marek Vasut
>
> Best regards,
> Marek Vasut
>