From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT
Date: Tue, 26 Jun 2012 17:21:46 +0900 [thread overview]
Message-ID: <4FE9711A.2090602@kmckk.co.jp> (raw)
In-Reply-To: <4FE90756.30009@kmckk.co.jp>
Hello,
(2012/06/26 9:50), Tetsuyuki Kobayashi wrote:
> (06/26/2012 06:34 AM), Wolfgang Denk wrote:
>
>> In message<4FE85B13.5080902@kmckk.co.jp> you wrote:
>>> I tried nfs command on KZM-A9-GT board and it fails every time with "ERROR: Cannot umount".
>>
>> KZM-A9-GT board? This is an out of tree port, isn't it?
> Not yet, but trying now.
>
>>
>> Are you sure the problems are not in the board specific code?
> OK. I will try the same thing on an in-tree board (maybe, panda board) to check if this is board specific or not.
I did on a panda board. It has the same problem and this patch solves it. So this is not board specific problem. Please consider to change global setting of NFS_TIMEOUT in nfs.c.
I hope someone else tries nfs command on the other board.
Following is the detail I did:
The default config of pand board disables NFS command.
So add this line in omap4_panda.h
#define COFNIG_CMD_NFS
(This line must be after #include configs/omap4_common.h>
I had trouble to use network on a panda board at the source from u-boot master git.
Instead, I used source code from Linaro git.
(I think this is another issue. Just focus NFS timeout now.)
Before applying the patch: error occurs like this.
Panda # usb start
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
scanning bus for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv ipaddr 192.168.1.162
Panda # setenv serverip 192.168.1.110
Panda # nfs /export/tmp/uImage
Waiting for Ethernet connection... done.
Using sms0 device
File transfer via NFS from server 192.168.1.110; our IP address is 192.168.1.162
Filename '/export/tmp/uImage'.
Load address: 0x82000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##############################################T T *** ERROR: Cannot umount
Panda #
After applying the patch: it seems OK.
Panda # usb start
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
scanning bus for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv ipaddr 192.168.1.162
Panda # setenv serverip 192.168.1.110
Panda # nfs /export/tmp/uImage
Waiting for Ethernet connection... done.
Using sms0 device
File transfer via NFS from server 192.168.1.110; our IP address is 192.168.1.162
Filename '/export/tmp/uImage'.
Load address: 0x82000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##############################################
done
Bytes transferred = 2230644 (220974 hex)
Panda #
--
Tetsuyuki Kobayashi
next prev parent reply other threads:[~2012-06-26 8:21 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-25 12:35 [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT Tetsuyuki Kobayashi
2012-06-25 21:34 ` Wolfgang Denk
2012-06-26 0:50 ` Tetsuyuki Kobayashi
2012-06-26 8:21 ` Tetsuyuki Kobayashi [this message]
2012-06-26 8:52 ` Wolfgang Denk
2012-06-26 15:30 ` Joe Hershberger
2012-06-26 18:34 ` Scott Wood
2012-06-26 18:45 ` Joe Hershberger
2012-06-27 4:32 ` Tetsuyuki Kobayashi
2012-07-03 11:22 ` [U-Boot] [RFC][PATCH] net: nfs: make NFS_TIMEOUT configurable Tetsuyuki Kobayashi
2012-07-03 13:47 ` Joe Hershberger
2012-07-03 14:13 ` Tetsuyuki Kobayashi
2012-07-04 2:47 ` [U-Boot] [RFC][PATCH v2] " Tetsuyuki Kobayashi
2012-07-04 5:40 ` Wolfgang Denk
2012-07-04 8:25 ` [U-Boot] [RFC][PATCH v3] " Tetsuyuki Kobayashi
2012-07-12 7:30 ` Tetsuyuki Kobayashi
2012-07-12 16:16 ` Joe Hershberger
2012-07-12 16:30 ` Tom Rini
2012-07-12 16:40 ` Joe Hershberger
2012-07-12 21:48 ` Tetsuyuki Kobayashi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE9711A.2090602@kmckk.co.jp \
--to=koba@kmckk.co.jp \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox