* [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary)
@ 2012-03-19 14:26 Jens Scharsig
2012-03-19 15:18 ` esw at bus-elektronik.de
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Jens Scharsig @ 2012-03-19 14:26 UTC (permalink / raw)
To: u-boot
Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
---
include/configs/at91sam9263ek.h | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 8399246..f02f245 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -33,7 +33,11 @@
*/
#include <asm/hardware.h>
+#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
#define CONFIG_SYS_TEXT_BASE 0x21F00000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x0000000
+#endif
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
@@ -148,11 +152,11 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007FE000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000)
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SIZE 0x10000
#define xstr(s) str(s)
#define str(s) #s
--
1.7.3.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary)
2012-03-19 14:26 [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary) Jens Scharsig
@ 2012-03-19 15:18 ` esw at bus-elektronik.de
2012-03-19 15:18 ` [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Jens Scharsig
2012-06-28 12:06 ` [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary) Andreas Bießmann
2 siblings, 0 replies; 4+ messages in thread
From: esw at bus-elektronik.de @ 2012-03-19 15:18 UTC (permalink / raw)
To: u-boot
Sorry about malformed subject
regards
Jens
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage
2012-03-19 14:26 [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary) Jens Scharsig
2012-03-19 15:18 ` esw at bus-elektronik.de
@ 2012-03-19 15:18 ` Jens Scharsig
2012-06-28 12:06 ` [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary) Andreas Bießmann
2 siblings, 0 replies; 4+ messages in thread
From: Jens Scharsig @ 2012-03-19 15:18 UTC (permalink / raw)
To: u-boot
Fix: board doesn't boot from norflash
Fix: environment can't write to flash (end address/start address not on sector boundary)
Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
---
include/configs/at91sam9263ek.h | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 8399246..f02f245 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -33,7 +33,11 @@
*/
#include <asm/hardware.h>
+#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
#define CONFIG_SYS_TEXT_BASE 0x21F00000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x0000000
+#endif
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
@@ -148,11 +152,11 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007FE000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000)
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SIZE 0x10000
#define xstr(s) str(s)
#define str(s) #s
--
1.7.3.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary)
2012-03-19 14:26 [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary) Jens Scharsig
2012-03-19 15:18 ` esw at bus-elektronik.de
2012-03-19 15:18 ` [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Jens Scharsig
@ 2012-06-28 12:06 ` Andreas Bießmann
2 siblings, 0 replies; 4+ messages in thread
From: Andreas Bießmann @ 2012-06-28 12:06 UTC (permalink / raw)
To: u-boot
Dear Jens Scharsig,
On 19.03.2012 15:26, Jens Scharsig (BuS Elektronik) wrote:
>
> Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
> ---
> include/configs/at91sam9263ek.h | 8 ++++++--
> 1 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
> index 8399246..f02f245 100644
> --- a/include/configs/at91sam9263ek.h
> +++ b/include/configs/at91sam9263ek.h
> @@ -33,7 +33,11 @@
> */
> #include <asm/hardware.h>
>
> +#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
> #define CONFIG_SYS_TEXT_BASE 0x21F00000
> +#else
> +#define CONFIG_SYS_TEXT_BASE 0x0000000
> +#endif
>
> /* ARM asynchronous clock */
> #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
> @@ -148,11 +152,11 @@
> #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
> #define CONFIG_SYS_MONITOR_LEN (256 << 10)
> #define CONFIG_ENV_IS_IN_FLASH 1
> -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007FE000)
> +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000)
> #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
>
> /* Address and size of Primary Environment Sector */
> -#define CONFIG_ENV_SIZE 0x2000
> +#define CONFIG_ENV_SIZE 0x10000
>
> #define xstr(s) str(s)
> #define str(s) #s
>
applied to u-boot-atmel/master, thanks!
Best regards
Andreas Bie?mann
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-06-28 12:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-19 14:26 [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary) Jens Scharsig
2012-03-19 15:18 ` esw at bus-elektronik.de
2012-03-19 15:18 ` [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Jens Scharsig
2012-06-28 12:06 ` [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary) Andreas Bießmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox