From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-1?Q?Andreas_Bie=DFmann?= <andreas.devel@googlemail.com>
Date: Thu, 28 Jun 2012 14:07:29 +0200
Subject: [U-Boot] [PATCH] Fix: brocken boot message at serial line on
 AT91SAM9263-EK board
In-Reply-To: <1332167159-8916-1-git-send-email-esw@bus-elektronik.de>
References: <1332167159-8916-1-git-send-email-esw@bus-elektronik.de>
Message-ID: <4FEC4901.3070404@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Jens Scharsig,

On 19.03.2012 15:25, Jens Scharsig (BuS Elektronik) wrote:
> 
> Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
> ---
>  board/atmel/at91sam9263ek/at91sam9263ek.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
> index 41ec752..60ff1c0 100644
> --- a/board/atmel/at91sam9263ek/at91sam9263ek.c
> +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
> @@ -254,6 +254,7 @@ int board_early_init_f(void)
>  		(1 << ATMEL_ID_PIOCDE),
>  		&pmc->pcer);
>  
> +	at91_seriald_hw_init();
>  	return 0;
>  }
>  
> @@ -267,7 +268,6 @@ int board_init(void)
>  	/* adress of boot parameters */
>  	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>  
> -	at91_seriald_hw_init();
>  #ifdef CONFIG_CMD_NAND
>  	at91sam9263ek_nand_hw_init();
>  #endif
> 


applied to u-boot-atmel/master, thanks!

Best regards

Andreas Bie?mann