From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support
Date: Thu, 05 Jul 2012 11:48:27 +0200 [thread overview]
Message-ID: <4FF562EB.40102@gmail.com> (raw)
In-Reply-To: <4ff54e86.1369980a.7b50.0f13@mx.google.com>
Dear Yann Vernier,
On 05.07.2012 10:05, Yann Vernier wrote:
> This change allows use of other flash chips than the two supported by
> the cm4008 flash.c. Tested with Micrel KSZ8695X demo board.
>
> Signed-off-by: Yann Vernier <yann.vernier@orsoc.se>
> ---
> board/cm4008/Makefile | 2 +-
> include/configs/cm4008.h | 4 ++++
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile
> index 5b98824..22fd74e 100644
> --- a/board/cm4008/Makefile
> +++ b/board/cm4008/Makefile
> @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
>
> LIB = $(obj)lib$(BOARD).o
>
> -COBJS := cm4008.o flash.o
> +COBJS := cm4008.o # flash.o
please do not comment but remove that entry. Also remove that flash.c
cause it is not longer necessary if you can use cfi flash implementation.
>
> SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> OBJS := $(addprefix $(obj),$(COBJS))
> diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
> index 7c2e113..6d1a1ae 100644
> --- a/include/configs/cm4008.h
> +++ b/include/configs/cm4008.h
> @@ -125,6 +125,10 @@
> #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
> #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
>
> +#define CONFIG_SYS_FLASH_CFI
> +#define CONFIG_FLASH_CFI_DRIVER 1
> +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
> +
> /*-----------------------------------------------------------------------
> * FLASH and environment organization
> */
>
Best regards
Andreas Bie?mann
next prev parent reply other threads:[~2012-07-05 9:48 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 8:05 [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support Yann Vernier
2012-07-05 9:48 ` Andreas Bießmann [this message]
2012-07-05 13:11 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: " Yann Vernier
2012-07-05 15:04 ` Andreas Bießmann
2012-07-06 8:27 ` [U-Boot] [PATCH v3] " Yann Vernier
2012-07-06 8:47 ` Andreas Bießmann
2012-07-06 11:33 ` Albert ARIBAUD
2012-08-09 13:33 ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized Yann Vernier
2012-10-04 9:15 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-10-26 21:34 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-10-18 18:57 ` Albert ARIBAUD
2012-11-19 11:55 ` [U-Boot] [PATCH] " Yann Vernier
2012-11-19 12:29 ` Yann Vernier
2012-11-20 0:05 ` Marek Vasut
2012-10-05 12:09 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-10-18 19:00 ` Albert ARIBAUD
2012-10-18 20:55 ` Joe Hershberger
2012-10-19 8:02 ` Yann Vernier
2012-10-26 21:37 ` Albert ARIBAUD
2012-11-19 11:42 ` Yann Vernier
2012-12-01 19:23 ` Joe Hershberger
2012-10-05 12:09 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-10-18 19:09 ` Albert ARIBAUD
2012-10-19 8:08 ` Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-10-18 19:11 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-10-18 19:13 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-10-18 19:14 ` Albert ARIBAUD
2012-11-10 8:03 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Albert ARIBAUD
2012-11-13 12:46 ` Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-07-05 13:22 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-07-05 13:41 ` Yann Vernier
2012-07-05 15:19 ` Andreas Bießmann
2012-07-12 19:37 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF562EB.40102@gmail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox