[U-Boot] [PATCH 2/3] cm4008: Fix ROM relocation.

["Andreas Bießmann" <andreas.devel@googlemail.com>]

Dear Yann Vernier,

On 04.07.2012 15:21, Yann Vernier wrote:
> Changed CONFIG_SYS_TEXT_BASE to actual address (required for
> board_init_f) and moved it into cm4008.h, along with a warning that it
> must match PHYS_FLASH_1 (since lowlevel_init relocates there).
> 
> Signed-off-by: Yann Vernier <yann.vernier@orsoc.se>
> ---
>  arch/arm/cpu/arm920t/ks8695/lowlevel_init.S |    9 +++++++--
>  board/cm4008/config.mk                      |    1 -
>  include/configs/cm4008.h                    |    3 +++
>  3 files changed, 10 insertions(+), 3 deletions(-)
>  delete mode 100644 board/cm4008/config.mk
> 
> diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> index e9f1227..8986e58 100644
> --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> @@ -92,11 +92,16 @@ lowlevel_init:
>  	 * ram from address 0, and flash at 32MB.
>  	 */
>  	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0)
> +        /* Remap flash memory to 768MB size, such that it covers
> +           both 0 (boot) and 512MB (run) regions */

please use tab as indention (a tab is 8 chars) ->
http://www.denx.de/wiki/U-Boot/CodingStyle

>  	ldr	r2, =0xbfc00040
>  	str	r2, [r1]		/* large flash map */
> -	ldr	pc, =(highflash+0x02000000-0x00f00000)	/* jump to high flash address */
> +        /* Relies on PHYS_FLASH_1==CONFIG_SYS_TEXT_BASE */
> +	ldr	pc, =(highflash)	/* jump to high flash address */
>  highflash:
> -	ldr	r2, =0x8fe00040
> +        /* Move ROM to high address, and reconfigure to 4MiB size */
> +	ldr	r2, =(((PHYS_FLASH_1+0x3f0000)<<(22-16))|  \
> +                      (PHYS_FLASH_1>>(16-12))|0x40)
>  	str	r2, [r1]		/* remap flash range */
>  
>  	/*
> diff --git a/board/cm4008/config.mk b/board/cm4008/config.mk
> deleted file mode 100644
> index 0d5923b..0000000
> --- a/board/cm4008/config.mk
> +++ /dev/null
> @@ -1 +0,0 @@
> -CONFIG_SYS_TEXT_BASE = 0x00f00000
> diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
> index 81e4de4..7c2e113 100644
> --- a/include/configs/cm4008.h
> +++ b/include/configs/cm4008.h
> @@ -118,6 +118,9 @@
>  
>  #define CONFIG_SYS_INIT_SP_ADDR	0x00020000 /* lowest 128k of RAM */
>  
> +/* CONFIG_SYS_TEXT_BASE and PHYS_FLASH_1 must match for both
> +   relocation in lowlevel_init.S and function array in board.c */
> +#define CONFIG_SYS_TEXT_BASE    0x02000000
>  #define PHYS_FLASH_1		0x02000000 /* Flash Bank #1 */
>  #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
>  #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
> 

The PHYS_FLASH_1 is a remnant from older days. The CFI switched to the
CONFIG_SYS_FLASH_BASE. Please remove the PHYS_FLASH_1 completely and
just work with the CONFIG_SYS_FLASH_BASE.
Beside that looks really good.

Best regards

Andreas Bie?mann