From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] arm: rmobile: kzm9g: Modify sdram area
Date: Thu, 05 Jul 2012 20:43:44 +0900 [thread overview]
Message-ID: <4FF57DF0.9040103@kmckk.co.jp> (raw)
In-Reply-To: <4FF57C69.5020704@kmckk.co.jp>
Reserve first 16MB for RT-CPU (as same as kernel config).
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
---
include/configs/kzm9g.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h
index 62ecadc..5e9b417 100644
--- a/include/configs/kzm9g.h
+++ b/include/configs/kzm9g.h
@@ -97,8 +97,9 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_SDRAM_BASE KZM_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE
+#define CONFIG_SDRAM_OFFSET_FOR_RT (16 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT)
+#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE (KZM_FLASH_BASE)
--
1.7.9.5
next prev parent reply other threads:[~2012-07-05 11:43 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-26 2:30 [U-Boot] [PATCH] arm: rmobile: kzm9g: Adjust hardware setting in lowlevel_init.S Tetsuyuki Kobayashi
2012-06-26 21:22 ` Albert ARIBAUD
2012-06-27 7:56 ` Tetsuyuki Kobayashi
2012-07-05 7:02 ` Nobuhiro Iwamatsu
2012-07-05 11:37 ` [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel Tetsuyuki Kobayashi
2012-07-05 11:43 ` Tetsuyuki Kobayashi [this message]
2012-07-05 11:43 ` [U-Boot] [PATCH 2/3] arm: rmobile: kzm9g: Adjust low level hardware setting Tetsuyuki Kobayashi
2012-07-05 11:43 ` [U-Boot] [PATCH 3/3] arm: rmobile: kzm9g: change prompt to board specific Tetsuyuki Kobayashi
2012-07-06 0:12 ` [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel Nobuhiro Iwamatsu
2012-07-06 7:48 ` Tetsuyuki Kobayashi
2012-07-06 13:46 ` Albert ARIBAUD
2012-07-07 10:58 ` Tetsuyuki Kobayashi
2012-07-07 11:23 ` [U-Boot] [PATCH v2 0/5] " Tetsuyuki Kobayashi
2012-07-07 11:30 ` [U-Boot] [PATCH v2 1/5] arm: rmobile: kzm9g: Modify sdram area Tetsuyuki Kobayashi
2012-07-07 11:31 ` [U-Boot] [PATCH v2 2/5] arm: rmobile: kzm9g: Adjust low level hardware setting Tetsuyuki Kobayashi
2012-07-07 11:31 ` [U-Boot] [PATCH v2 3/5] arm: rmobile: kzm9g: change prompt to board specific Tetsuyuki Kobayashi
2012-07-07 11:32 ` [U-Boot] [PATCH v2 4/5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt Tetsuyuki Kobayashi
2012-07-07 11:32 ` [U-Boot] [PATCH v2 5/5] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g Tetsuyuki Kobayashi
2012-07-09 6:30 ` [U-Boot] [PATCH v2 0/5] arm: rmobile: kzm9g: enable booting Linux kernel Tetsuyuki Kobayashi
2012-07-09 11:06 ` [U-Boot] [PATCH v3 0/6] " Tetsuyuki Kobayshi
2012-07-09 11:06 ` [U-Boot] [PATCH v3 1/6] arm: rmobile: kzm9g: Modify sdram area Tetsuyuki Kobayshi
2012-07-09 11:06 ` [U-Boot] [PATCH v3 2/6] arm: rmobile: kzm9g: Adjust low level hardware setting Tetsuyuki Kobayshi
2012-07-09 11:06 ` [U-Boot] [PATCH v3 3/6] arm: rmobile: kzm9g: change prompt to board specific Tetsuyuki Kobayshi
2012-07-09 11:06 ` [U-Boot] [PATCH v3 4/6] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt Tetsuyuki Kobayshi
2012-07-09 11:06 ` [U-Boot] [PATCH v3 5/6] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g Tetsuyuki Kobayshi
2012-07-09 11:07 ` [U-Boot] [PATCH v3 6/6] arm: rmobile: kzm9g: Modify bus controller setting for CS4 Tetsuyuki Kobayshi
2012-07-17 5:13 ` [U-Boot] [PATCH v4 0/7] arm: rmobile: kzm9g: enable booting Linux kernel Tetsuyuki Kobayshi
2012-07-17 5:13 ` [U-Boot] [PATCH v4 1/7] arm: rmobile: kzm9g: Modify sdram area Tetsuyuki Kobayshi
2012-07-19 23:43 ` Nobuhiro Iwamatsu
2012-07-17 5:13 ` [U-Boot] [PATCH v4 2/7] arm: rmobile: kzm9g: Adjust low level hardware setting Tetsuyuki Kobayshi
2012-07-17 5:13 ` [U-Boot] [PATCH v4 3/7] arm: rmobile: kzm9g: change prompt to board specific Tetsuyuki Kobayshi
2012-07-19 23:44 ` Nobuhiro Iwamatsu
2012-07-17 5:13 ` [U-Boot] [PATCH v4 4/7] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt Tetsuyuki Kobayshi
2012-07-20 0:15 ` Nobuhiro Iwamatsu
2012-07-20 9:27 ` [U-Boot] [PATCH v5] " Tetsuyuki Kobayshi
2012-07-23 6:28 ` Nobuhiro Iwamatsu
2012-07-17 5:13 ` [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g Tetsuyuki Kobayshi
2012-07-19 23:51 ` Nobuhiro Iwamatsu
2012-10-04 8:45 ` Albert ARIBAUD
2012-10-04 22:02 ` Nobuhiro Iwamatsu
2012-10-05 18:44 ` Albert ARIBAUD
2012-10-05 18:49 ` Tom Rini
2012-07-17 5:13 ` [U-Boot] [PATCH v4 6/7] arm: rmobile: kzm9g: Modify bus controller setting for CS4 Tetsuyuki Kobayshi
2012-07-19 23:51 ` Nobuhiro Iwamatsu
2012-07-17 5:13 ` [U-Boot] [PATCH v4 7/7] arm: rmobile: kzm9g: enable reset command Tetsuyuki Kobayshi
2012-07-19 23:48 ` Nobuhiro Iwamatsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF57DF0.9040103@kmckk.co.jp \
--to=koba@kmckk.co.jp \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox