public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Zhong Hongbo <bocui107@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.
Date: Thu, 05 Jul 2012 19:55:49 +0800	[thread overview]
Message-ID: <4FF580C5.1000008@gmail.com> (raw)
In-Reply-To: <1341273049-3587-1-git-send-email-bocui107@gmail.com>

Hi Minkyu,

Could you help me to review it?

Thanks,
hongbo

On 07/03/2012 07:50 AM, Zhong Hongbo wrote:
> From: Zhong Hongbo <bocui107@gmail.com>
> 
> In general, The get_timer_masked function get the system time,
> no the number of ticks. Such as the nand_wait_ready will use
> get_timer_masked to delay the operations. And change the system
> time to adopt to the CONFIG_SYS_HZ.
> 
> Signed-off-by: Hongbo Zhong <bocui107@gmail.com>
> ---
>  arch/arm/cpu/armv7/s5p-common/pwm.c   |    2 +-
>  arch/arm/cpu/armv7/s5p-common/timer.c |   20 ++++++++++++++++----
>  2 files changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c
> index 58d279e..44d7bc3 100644
> --- a/arch/arm/cpu/armv7/s5p-common/pwm.c
> +++ b/arch/arm/cpu/armv7/s5p-common/pwm.c
> @@ -170,7 +170,7 @@ int pwm_init(int pwm_id, int div, int invert)
>  	timer_rate_hz = get_pwm_clk() / ((prescaler + 1) *
>  			(div + 1));
>  
> -	timer_rate_hz = timer_rate_hz / 100;
> +	timer_rate_hz = timer_rate_hz / CONFIG_SYS_HZ;
>  
>  	/* set count value */
>  	offset = pwm_id * 3;
> diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c
> index 359c21f..bb0e795 100644
> --- a/arch/arm/cpu/armv7/s5p-common/timer.c
> +++ b/arch/arm/cpu/armv7/s5p-common/timer.c
> @@ -31,6 +31,8 @@
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> +unsigned long get_current_tick(void);
> +
>  /* macro to read the 16 bit timer */
>  static inline struct s5p_timer *s5p_get_base_timer(void)
>  {
> @@ -44,6 +46,8 @@ int timer_init(void)
>  	pwm_config(4, 0, 0);
>  	pwm_enable(4);
>  
> +	reset_timer_masked();
> +
>  	return 0;
>  }
>  
> @@ -72,16 +76,16 @@ void __udelay(unsigned long usec)
>  		 * 3. finish normalize.
>  		 */
>  		tmo = usec / 1000;
> -		tmo *= (CONFIG_SYS_HZ * count_value / 10);
> +		tmo *= (CONFIG_SYS_HZ * count_value);
>  		tmo /= 1000;
>  	} else {
>  		/* else small number, don't kill it prior to HZ multiply */
> -		tmo = usec * CONFIG_SYS_HZ * count_value / 10;
> +		tmo = usec * CONFIG_SYS_HZ * count_value;
>  		tmo /= (1000 * 1000);
>  	}
>  
>  	/* get current timestamp */
> -	tmp = get_timer(0);
> +	tmp = get_current_tick();
>  
>  	/* if setting this fordward will roll time stamp */
>  	/* reset "advancing" timestamp to 0, set lastinc value */
> @@ -92,7 +96,7 @@ void __udelay(unsigned long usec)
>  		tmo += tmp;
>  
>  	/* loop till event */
> -	while (get_timer_masked() < tmo)
> +	while (get_current_tick() < tmo)
>  		;	/* nop */
>  }
>  
> @@ -108,6 +112,14 @@ void reset_timer_masked(void)
>  unsigned long get_timer_masked(void)
>  {
>  	struct s5p_timer *const timer = s5p_get_base_timer();
> +	unsigned long count_value = readl(&timer->tcntb4);
> +
> +	return get_current_tick() / count_value;
> +}
> +
> +unsigned long get_current_tick(void)
> +{
> +	struct s5p_timer *const timer = s5p_get_base_timer();
>  	unsigned long now = readl(&timer->tcnto4);
>  	unsigned long count_value = readl(&timer->tcntb4);
>  
> 

  reply	other threads:[~2012-07-05 11:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-02 23:50 [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time Zhong Hongbo
2012-07-05 11:55 ` Zhong Hongbo [this message]
2012-07-06  2:13   ` Minkyu Kang
2012-07-06  4:43     ` Jaehoon Chung
2012-07-06 11:20       ` Minkyu Kang
2012-07-06 11:37         ` Zhong Hongbo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FF580C5.1000008@gmail.com \
    --to=bocui107@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox