From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 10 Jul 2012 11:34:03 +0200
Subject: [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree
	driver configuration
In-Reply-To: <CAPnjgZ3yUYpkZStRgDnwY2oRXOGQ=gQVtTwq2PL+q4ysBQ8OCA@mail.gmail.com>
References: <1341825639-23475-1-git-send-email-monstr@monstr.eu>
	<1341825639-23475-9-git-send-email-monstr@monstr.eu>
	<CAPnjgZ3yUYpkZStRgDnwY2oRXOGQ=gQVtTwq2PL+q4ysBQ8OCA@mail.gmail.com>
Message-ID: <4FFBF70B.8000305@monstr.eu>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 07/09/2012 11:32 PM, Simon Glass wrote:
> Hi Michal,
>
> On Mon, Jul 9, 2012 at 2:20 AM, Michal Simek <monstr at monstr.eu <mailto:monstr@monstr.eu>> wrote:
>
>     Read configuration from DTB.
>
>     Signed-off-by: Michal Simek <monstr at monstr.eu <mailto:monstr@monstr.eu>>
>     ---
>       arch/microblaze/cpu/timer.c |   25 +++++++++++++++++++++++++
>       1 files changed, 25 insertions(+), 0 deletions(-)
>
>     diff --git a/arch/microblaze/cpu/timer.c b/arch/microblaze/cpu/timer.c
>     index dfaaaf5..91ca42b 100644
>     --- a/arch/microblaze/cpu/timer.c
>     +++ b/arch/microblaze/cpu/timer.c
>     @@ -25,6 +25,9 @@
>       #include <common.h>
>       #include <asm/microblaze_timer.h>
>       #include <asm/microblaze_intc.h>
>     +#include <fdtdec.h>
>     +
>     +DECLARE_GLOBAL_DATA_PTR;
>
>       volatile int timestamp = 0;
>       microblaze_timer_t *tmr;
>     @@ -62,11 +65,33 @@ int timer_init (void)
>              u32 preload = 0;
>              u32 ret = 0;
>
>     +#ifndef CONFIG_OF_CONTROL
>
>
> Maybe make this #ifdef and put the fdt code first?
>
>       #if defined(CONFIG_SYS_TIMER_0_ADDR) && defined(CONFIG_SYS_INTC_0_NUM)
>              preload = XILINX_CLOCK_FREQ / CONFIG_SYS_HZ;
>              irq = CONFIG_SYS_TIMER_0_IRQ;
>              tmr = (microblaze_timer_t *) (CONFIG_SYS_TIMER_0_ADDR);
>       #endif
>     +#else
>     +       int temp;
>     +       int offset = 0;
>
>
> Can remove =0 I think.
>
>     +
>     +       offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset,
>     + "xlnx,xps-timer-1.00.a");


ok. It must be initialized because offset is passed as argument to the next function.
For interrupt code is fine to add there zero but for timer I would keep there offset
because system can contain more timers and we can change it to while loop soon.

(NOTE: We have had discussion to use aliases for system timer but we haven't finished it.

Thanks,
Michal



-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian