From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Fri, 13 Jul 2012 10:44:06 +0200 Subject: [U-Boot] ksz9021 phy support In-Reply-To: References: Message-ID: <4FFFDFD6.40908@de.bosch.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 13.07.2012 10:20, Schneider, Kolja wrote: > Hi Troy, > > is here any specific reason for the "disable_giga" switch in the ksz9021 phy driver? We're just having some issues here, most of the times we don't get the link up with a gigabit connection. Anything else that caused trouble on your side, apart from the PHY ID mess? The first versions of the SabreLite had an hardware issue: "The current schematic has the center tap pin 9 of the MAG/JAC USB combo to 3.3 filtered supply. Letting this pin float solves the problem." https://wiki.linaro.org/Boards/MX6QSabreLite -> Gigabit Ethernet issue Best regards Dirk