Re: [PATCH 3/3] arm: dts: drop downstream IPQ4019 DTSI

[Caleb Connolly <caleb.connolly@linaro.org>]

On 24/04/2024 13:13, Robert Marko wrote:
> We want to use OF_UPSTREAM on IPQ40XX as its well supported upstream, so
> lets drop our downstream DTSI.
> 
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>   arch/arm/dts/qcom-ipq4019.dtsi | 202 ---------------------------------
>   1 file changed, 202 deletions(-)
>   delete mode 100644 arch/arm/dts/qcom-ipq4019.dtsi
> 
> diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
> deleted file mode 100644
> index f9489e42ea..0000000000
> --- a/arch/arm/dts/qcom-ipq4019.dtsi
> +++ /dev/null
> @@ -1,202 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Copyright (c) 2019 Sartura Ltd.
> - *
> - * Author: Robert Marko <robert.marko@sartura.hr>
> - */
> -
> - /dts-v1/;
> -
> -#include "skeleton.dtsi"
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
> -#include <dt-bindings/reset/qcom,ipq4019-reset.h>
> -
> -/ {
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -
> -	model = "Qualcomm Technologies, Inc. IPQ4019";
> -	compatible = "qcom,ipq4019";
> -
> -	aliases {
> -		serial0 = &blsp1_uart1;
> -		spi0 = &blsp1_spi1;
> -	};
> -
> -	reserved-memory {
> -		#address-cells = <0x1>;
> -		#size-cells = <0x1>;
> -		ranges;
> -
> -		smem_mem: smem_region: smem@87e00000 {
> -			reg = <0x87e00000 0x080000>;
> -			no-map;
> -		};
> -
> -		tz@87e80000 {
> -			reg = <0x87e80000 0x180000>;
> -			no-map;
> -		};
> -	};
> -
> -	smem {
> -		compatible = "qcom,smem";
> -		memory-region = <&smem_mem>;
> -	};
> -
> -	soc: soc {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		ranges;
> -		compatible = "simple-bus";
> -
> -		gcc: clock-controller@1800000 {
> -			compatible = "qcom,gcc-ipq4019";
> -			reg = <0x1800000 0x60000>;
> -			#clock-cells = <1>;
> -			#reset-cells = <1>;
> -			bootph-all;
> -		};
> -
> -		rng: rng@22000 {
> -			compatible = "qcom,prng";
> -			reg = <0x22000 0x140>;
> -			clocks = <&gcc GCC_PRNG_AHB_CLK>;
> -			status = "disabled";
> -		};
> -
> -		soc_gpios: pinctrl@1000000 {
> -			compatible = "qcom,ipq4019-pinctrl";
> -			reg = <0x1000000 0x300000>;
> -			gpio-controller;
> -			gpio-count = <100>;
> -			gpio-bank-name="soc";
> -			#gpio-cells = <2>;
> -			bootph-all;
> -		};
> -
> -		blsp1_uart1: serial@78af000 {
> -			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> -			reg = <0x78af000 0x200>;
> -			clock = <&gcc GCC_BLSP1_UART1_APPS_CLK>;
> -			bit-rate = <0xFF>;
> -			status = "disabled";
> -			bootph-all;
> -		};
> -
> -		blsp1_spi1: spi@78b5000 {
> -			compatible = "qcom,spi-qup-v2.2.1";
> -			reg = <0x78b5000 0x600>;
> -			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			status = "disabled";
> -			bootph-all;
> -		};
> -
> -		mdio: mdio@90000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "qcom,ipq4019-mdio";
> -			reg = <0x90000 0x64>;
> -			status = "disabled";
> -
> -			ethphy0: ethernet-phy@0 {
> -				reg = <0>;
> -			};
> -
> -			ethphy1: ethernet-phy@1 {
> -				reg = <1>;
> -			};
> -
> -			ethphy2: ethernet-phy@2 {
> -				reg = <2>;
> -			};
> -
> -			ethphy3: ethernet-phy@3 {
> -				reg = <3>;
> -			};
> -
> -			ethphy4: ethernet-phy@4 {
> -				reg = <4>;
> -			};
> -		};
> -
> -		usb3_ss_phy: ssphy@9a000 {
> -			compatible = "qcom,usb-ss-ipq4019-phy";
> -			#phy-cells = <0>;
> -			reg = <0x9a000 0x800>;
> -			reg-names = "phy_base";
> -			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
> -			reset-names = "por_rst";
> -			status = "disabled";
> -		};
> -
> -		usb3_hs_phy: hsphy@a6000 {
> -			compatible = "qcom,usb-hs-ipq4019-phy";
> -			#phy-cells = <0>;
> -			reg = <0xa6000 0x40>;
> -			reg-names = "phy_base";
> -			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
> -			reset-names = "por_rst", "srif_rst";
> -			status = "disabled";
> -		};
> -
> -		usb3: usb3@8af8800 {
> -			compatible = "qcom,dwc3";
> -			reg = <0x8af8800 0x100>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			clocks = <&gcc GCC_USB3_MASTER_CLK>,
> -				 <&gcc GCC_USB3_SLEEP_CLK>,
> -				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
> -			clock-names = "master", "sleep", "mock_utmi";
> -			ranges;
> -			status = "disabled";
> -
> -			dwc3@8a00000 {
> -				compatible = "snps,dwc3";
> -				reg = <0x8a00000 0xf8000>;
> -				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
> -				phy-names = "usb2-phy", "usb3-phy";
> -				dr_mode = "host";
> -				maximum-speed = "super-speed";
> -				snps,dis_u2_susphy_quirk;
> -			};
> -		};
> -
> -		usb2_hs_phy: hsphy@a8000 {
> -			compatible = "qcom,usb-hs-ipq4019-phy";
> -			#phy-cells = <0>;
> -			reg = <0xa8000 0x40>;
> -			reg-names = "phy_base";
> -			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
> -			reset-names = "por_rst", "srif_rst";
> -			status = "disabled";
> -		};
> -
> -		usb2: usb2@60f8800 {
> -			compatible = "qcom,dwc3";
> -			reg = <0x60f8800 0x100>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			clocks = <&gcc GCC_USB2_MASTER_CLK>,
> -				 <&gcc GCC_USB2_SLEEP_CLK>,
> -				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
> -			clock-names = "master", "sleep", "mock_utmi";
> -			ranges;
> -			status = "disabled";
> -
> -			dwc3@6000000 {
> -				compatible = "snps,dwc3";
> -				reg = <0x6000000 0xf8000>;
> -				phys = <&usb2_hs_phy>;
> -				phy-names = "usb2-phy";
> -				dr_mode = "host";
> -				maximum-speed = "high-speed";
> -				snps,dis_u2_susphy_quirk;
> -			};
> -		};
> -	};
> -};

-- 
// Caleb (they/them)