[PATCH v2 04/11] rockchip: idb: add info and stop command

[Johan Jonker <jbx6244@gmail.com>]

Add info and stop command to become aware of what goes on
inside the driver and to release some resources.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

optional
---
 arch/arm/mach-rockchip/rockchip_idb.c | 116 ++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

diff --git a/arch/arm/mach-rockchip/rockchip_idb.c b/arch/arm/mach-rockchip/rockchip_idb.c
index 832b3251..0692ce1a 100644
--- a/arch/arm/mach-rockchip/rockchip_idb.c
+++ b/arch/arm/mach-rockchip/rockchip_idb.c
@@ -1456,10 +1456,124 @@ int rk_idb_start(void)
 
 #if !defined(CONFIG_SPL_BUILD)
 
+int rk_idb_stop(void)
+{
+	struct udevice *bdev;
+	int ret;
+
+	ret = blk_find_device(IF_TYPE_RK_IDB, 0, &bdev);
+	if (ret) {
+		printf("no IDB blk device found\n");
+		return 0;
+	}
+
+	device_remove(bdev, DM_REMOVE_NORMAL);
+	device_unbind(bdev);
+
+	return 0;
+}
+
+void rk_idb_print_idb_data(u32 *data)
+{
+	struct sector0 *sec0 = (struct sector0 *)data;
+
+	printf("\n");
+
+	printf("magic            : %08x\n"
+	       "rc4_flag         : %08x\n"
+	       "boot_code1_offset: %d\n"
+	       "flash_data_size  : %d\n"
+	       "flash_boot_size  : %d\n",
+	       sec0->magic,
+	       sec0->rc4_flag,
+	       sec0->boot_code1_offset,
+	       sec0->flash_data_size,
+	       sec0->flash_boot_size);
+
+	printf("\n");
+}
+
+static int rk_idb_info(void)
+{
+	struct rk_idb *plat;
+	struct udevice *dev;
+	u32 data[512];
+	u32 spare[2];
+	int ret;
+	int i, j;
+
+	ret = uclass_find_device(UCLASS_RK_IDB, 0, &dev);
+	if (ret) {
+		printf("no IDB device found\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (!device_active(dev)) {
+		printf("IDB device present but not probed\n");
+		return CMD_RET_FAILURE;
+	}
+
+	plat = dev_get_plat(dev);
+
+	printf("\n##### HARDWARE #####\n");
+
+	printf("REG              : 0x%08x\n", (u32)plat->regs);
+
+	printf("FLASH ID         : %02x %02x %02x %02x %02x %02x\n",
+	       plat->info->nand_id[0],
+	       plat->info->nand_id[1],
+	       plat->info->nand_id[2],
+	       plat->info->nand_id[3],
+	       plat->info->nand_id[4],
+	       plat->info->nand_id[5]);
+
+	printf("page_per_blk     : %d\n", plat->info->page_per_blk);
+	printf("lsb_mode         : %d\n", plat->info->lsb_mode);
+	printf("randomizer       : %d\n", (plat->info->operation_opt >> 7) & 1);
+
+	printf("\n##### BLOCK DEVICE #####\n");
+
+	ret = blk_find_device(IF_TYPE_RK_IDB, 0, &dev);
+	if (ret) {
+		printf("no IDB blk device found\n");
+	} else {
+		struct blk_desc *blk_dev = dev_get_uclass_plat(dev);
+
+		printf("blocks           : %lu\n", (unsigned long)blk_dev->lba);
+	}
+
+	printf("uuid_part_str    : %s\n", plat->uuid_part_str);
+	printf("uuid_disk_str    : %s\n", plat->uuid_disk_str);
+
+	printf("\n##### IDB #####\n");
+	for (i = 0; i < plat->blk_counter; i++) {
+		rk_idb_read_block(plat, j, 4, data, spare);
+
+		for (j = 0; j < 4; j++) {
+			if (j != 1)
+				rk_idb_rc4((char *)data + j * 512, 512);
+		}
+
+		printf("\nblk     : %d\n", plat->idblock[i].blk);
+		printf("ecc     : %d\n", plat->idblock[i].ecc);
+		printf("sectors : %d\n", plat->idblock[i].sectors);
+
+		rk_idb_print_idb_data(data);
+	}
+
+	return 0;
+}
+
 static int rk_idb_do(struct cmd_tbl *cmdtp, int flag, int argc,
 		     char *const argv[])
 {
 	if (argc == 2) {
+		if (!strcmp(argv[1], "info"))
+			return rk_idb_info();
+
+		if (!strcmp(argv[1], "stop"))
+			return rk_idb_stop();
+
 		if (!strcmp(argv[1], "start"))
 			return rk_idb_start();
 	}
@@ -1471,6 +1585,8 @@ U_BOOT_CMD(
 	idb, 5, 1, rk_idb_do,
 	"Rockchip IDB block device",
 	"start - start IDB device\n"
+	"idb stop  - stop IDB blk device\n"
+	"idb info  - show IDB device info\n"
 );
 
 #endif
-- 
2.20.1