From: Yann Vernier <yann.vernier@orsoc.se>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support
Date: Thu, 5 Jul 2012 10:05:06 +0200 [thread overview]
Message-ID: <4ff54e86.1369980a.7b50.0f13@mx.google.com> (raw)
This change allows use of other flash chips than the two supported by
the cm4008 flash.c. Tested with Micrel KSZ8695X demo board.
Signed-off-by: Yann Vernier <yann.vernier@orsoc.se>
---
board/cm4008/Makefile | 2 +-
include/configs/cm4008.h | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile
index 5b98824..22fd74e 100644
--- a/board/cm4008/Makefile
+++ b/board/cm4008/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := cm4008.o flash.o
+COBJS := cm4008.o # flash.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index 7c2e113..6d1a1ae 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -125,6 +125,10 @@
#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
--
1.7.10
next reply other threads:[~2012-07-05 8:05 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 8:05 Yann Vernier [this message]
2012-07-05 9:48 ` [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support Andreas Bießmann
2012-07-05 13:11 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: " Yann Vernier
2012-07-05 15:04 ` Andreas Bießmann
2012-07-06 8:27 ` [U-Boot] [PATCH v3] " Yann Vernier
2012-07-06 8:47 ` Andreas Bießmann
2012-07-06 11:33 ` Albert ARIBAUD
2012-08-09 13:33 ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized Yann Vernier
2012-10-04 9:15 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-10-26 21:34 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-10-18 18:57 ` Albert ARIBAUD
2012-11-19 11:55 ` [U-Boot] [PATCH] " Yann Vernier
2012-11-19 12:29 ` Yann Vernier
2012-11-20 0:05 ` Marek Vasut
2012-10-05 12:09 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-10-18 19:00 ` Albert ARIBAUD
2012-10-18 20:55 ` Joe Hershberger
2012-10-19 8:02 ` Yann Vernier
2012-10-26 21:37 ` Albert ARIBAUD
2012-11-19 11:42 ` Yann Vernier
2012-12-01 19:23 ` Joe Hershberger
2012-10-05 12:09 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-10-18 19:09 ` Albert ARIBAUD
2012-10-19 8:08 ` Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-10-18 19:11 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-10-18 19:13 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-10-18 19:14 ` Albert ARIBAUD
2012-11-10 8:03 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Albert ARIBAUD
2012-11-13 12:46 ` Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-07-05 13:22 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-07-05 13:41 ` Yann Vernier
2012-07-05 15:19 ` Andreas Bießmann
2012-07-12 19:37 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ff54e86.1369980a.7b50.0f13@mx.google.com \
--to=yann.vernier@orsoc.se \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox