From mboxrd@z Thu Jan  1 00:00:00 1970
From: Zhong Hongbo <bocui107@gmail.com>
Date: Thu, 19 Jul 2012 20:36:34 +0800
Subject: [U-Boot] I apply to maintain S3C6400 board for u-boot
In-Reply-To: <5007FBBF.7040606@gmail.com>
References: <5007FBBF.7040606@gmail.com>
Message-ID: <5007FF52.60409@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 07/19/2012 08:21 PM, Zhong Hongbo wrote:
> Hi Denx,
> 
> I get some information from MAINTAINERS file. I know The board of
> S3C6400 is a orphaned board. Also I have not the board, But I have a
> S3C6410 board in my hand. In my development u-boot for my board, I know
> the S3C6410 replace the s3c6400, and they use the same arm1176
> architecture. So I think that I can help do a little thing for S3C6400's
> u-boot.
> 
> In the recently, I send the patch serial of S3C6400. This patch
> is very important for S3C64XX. It clear the old method to operate the
> I/O port, and adopt the new SPL boot to reduce the code number. I expect
> get the advice for this patch. But I wait for a long time, I do not know
> who can help me to review this patch? who can merge this patch?
Sorry, I check the patchwork. I found this patch are delegated to Minkyu
Kang. But I can not receive the notify email.

Thanks,
hongbo
> 
> If anyone believe me, I will continue to maintain the board, Maybe I
> have some limitation, Such as I have a poor english.  But I believe I
> can keep the board can work normal in u-boot mainline, and I will reply
> the email about S3C64xx CPU in time.
> 
> What do you think it?
> 
> Thanks
> hongbo
>