From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zhong Hongbo Date: Fri, 20 Jul 2012 19:56:01 +0800 Subject: [U-Boot] I apply to maintain S3C6400 board for u-boot In-Reply-To: <20120720071116.5747120224C@gemini.denx.de> References: <5007FBBF.7040606@gmail.com> <20120720071116.5747120224C@gemini.denx.de> Message-ID: <50094751.1050803@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Wolfgang Denk, On 07/20/2012 03:11 PM, Wolfgang Denk wrote: > Dear Hongbo, > > In message <5007FBBF.7040606@gmail.com> you wrote: >> >> I get some information from MAINTAINERS file. I know The board of >> S3C6400 is a orphaned board. Also I have not the board, But I have a >> S3C6410 board in my hand. In my development u-boot for my board, I know >> the S3C6410 replace the s3c6400, and they use the same arm1176 >> architecture. So I think that I can help do a little thing for S3C6400's >> u-boot. > > Thanks for volunteering. If you want to take over responsbility for a > board (even an orphaned one) then please send a patch that adds you to > the MAINTAINERS file. OK > >> In the recently, I send the patch serial of S3C6400. This patch >> is very important for S3C64XX. It clear the old method to operate the >> I/O port, and adopt the new SPL boot to reduce the code number. I expect >> get the advice for this patch. But I wait for a long time, I do not know >> who can help me to review this patch? who can merge this patch? > > Please don't be discouraged by missing comments - in general the rule > is "No news is Good News", i. e. receiving no comments is often better > than receiving a large number of deep-going change requests ;-) Good to know. > > These boards use Samsung SoCs, so the Samsung custodian (Minkyu Kang, > on cc:) is supposed to process these, but please note that the merge > window is currently closed, which might explain for lack of comments. Thanks for your explanation. Thanks, hongbo > >> If anyone believe me, I will continue to maintain the board, Maybe I >> have some limitation, Such as I have a poor english. But I believe I >> can keep the board can work normal in u-boot mainline, and I will reply >> the email about S3C64xx CPU in time. > > Thanks you very much in advance. Your efforts are highly appreciated. > > Best regards, > > Wolfgang Denk >