From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bill Date: Tue, 31 Jul 2012 09:17:36 -0500 Subject: [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG In-Reply-To: References: <50118C35.4040304@techsi.com> <5012929C.9000905@techsi.com> <5012B551.8000603@techsi.com> <5016BF08.90804@techsi.com> <5016D830.5010306@techsi.com> Message-ID: <5017E900.1040707@techsi.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de That did it! Thanks. Bill On 7/30/2012 3:59 PM, Fabio Estevam wrote: > On Mon, Jul 30, 2012 at 3:53 PM, Bill wrote: >> Progress! I switched all the references from ttyAMA0... to ttyAM0. Also >> changed netargs too. Now it starts to boot linux but hangs right after the >> line of: >> mxs_cpu_init: cpufreq init finished. > Please remove cpufreq from your kernel config. > > You can use this patch: > https://github.com/Freescale/meta-fsl-arm/blob/denzil/recipes-kernel/linux/linux-imx-2.6.35.3/mx28-removecpufreq.patch > > Regards, > > Fabio Estevam -- William (Bill) L. Sousan, Ph.D. (w) 402.331.4977 ext. 4002 bsousan at techsi.com Technical Support Inc. 11253 John Galt Blvd Omaha, NE 68137 www.techsi.com 8(a) SDB Certified, ISO 9001:2008