From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Wed, 1 Aug 2012 15:22:30 +0200 Subject: [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux In-Reply-To: <20120801125520.1975A203B37@gemini.denx.de> References: <1343819151-29871-1-git-send-email-dirk.behme@de.bosch.com> <5019180C.4060109@de.bosch.com> <20120801125520.1975A203B37@gemini.denx.de> Message-ID: <50192D96.60902@de.bosch.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 01.08.2012 14:55, Wolfgang Denk wrote: > Dear Dirk Behme, > > In message <5019180C.4060109@de.bosch.com> you wrote: >> It seems to me that the SGTL5000 kernel feature for the SabreLite was >> developed with a Freescale U-Boot (patching the kernel with DT append) >> and not tested with the mainline U-Boot. > > Probably. But the question is still why this should be changed in > U-Boot. Why doesn't the Linux driver set the pin mux configuration > it needs? Sorry, I don't know. The Linux driver developers told me "there is no U-Boot dependency". Maybe they could answer this question? CCed. Best regards Dirk