From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 02 Aug 2012 09:48:52 +0200 Subject: [U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux In-Reply-To: <501A2E0C.6000404@de.bosch.com> References: <1343819151-29871-1-git-send-email-dirk.behme@de.bosch.com> <501A2E0C.6000404@de.bosch.com> Message-ID: <501A30E4.3080609@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/08/2012 09:36, Dirk Behme wrote: > On 01.08.2012 13:05, Dirk Behme wrote: >> A recent Linux kernel (>= 3.5) has support for the SGTL 5000 sound >> on the SabreLite board. To make this work, U-Boot has to configure the >> pin mux for PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 correctly. >> >> Taken from Freescale's ER5 U-Boot for the SabreLite. >> >> Signed-off-by: Dirk Behme >> CC: Troy Kisky >> CC: Stefano Babic >> --- >> board/freescale/mx6qsabrelite/imximage.cfg | 3 +++ >> 1 files changed, 3 insertions(+), 0 deletions(-) >> >> diff --git a/board/freescale/mx6qsabrelite/imximage.cfg >> b/board/freescale/mx6qsabrelite/imximage.cfg >> index 62498ab..2d7825a 100644 >> --- a/board/freescale/mx6qsabrelite/imximage.cfg >> +++ b/board/freescale/mx6qsabrelite/imximage.cfg >> @@ -168,3 +168,6 @@ DATA 4 0x020e0010 0xF00000CF >> # set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 >> DATA 4 0x020e0018 0x007F007F >> DATA 4 0x020e001c 0x007F007F >> +# set PAD_GPIO_0__CCM_CLKO and PAD_GPIO_3__CCM_CLKO2 >> +DATA 4 0x020e0220 0x00000000 >> +DATA 4 0x020e022c 0x00000004 >> \ No newline at end of file > > This is replaced with a kernel patch > > http://www.spinics.net/lists/arm-kernel/msg187222.html > > and therefore this patch is obsolete now. Ok, thanks. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================