From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx
Date: Fri, 10 Aug 2012 08:54:06 +0200 [thread overview]
Message-ID: <5024B00E.1070208@denx.de> (raw)
In-Reply-To: <50213BA4.1050801@denx.de>
Hi Albert,
an update pull request, please pull from u-boot-imx, thanks.
The following changes since commit 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08:
DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 42abce776222a5d5cb2b355e77539cabb705b04a:
sc_sps_1: Adjust board config to use 'mxs' SoC code (2012-08-10
08:48:24 +0200)
----------------------------------------------------------------
Beno?t Th?baudeau (1):
rtc: imxdi: Initial support
Fabio Estevam (3):
mx28evk: Turn on caches
mx51evk: do not overwrite the console
vision2: do not overwrite the console
Marek Vasut (9):
MX28: SPI: Refactor spi_xfer a bit
MX28: SPI: Pull out the PIO transfer function
MX28: SPI: Add DMA transfer support
MX28: Fix up the MMC driver DMA mode
MX28: Split out the PIO and DMA transfer functions
MX28: Transfer small blocks via PIO in MXS MMC
MX28: Fix MXS MMC DMA issues
MX28: Move the u-boot.bd info CPUDIR/SOCDIR
MX28: Add SchulerControl SC_SPS_1 platform
Otavio Salvador (10):
imx: Use a clear identification of an unidentified CPU type
MX28: extend print_cpuinfo() to use chip information
MX28: use a clear name for DDR2 initialization
mxs: reorganize source directory for easy sharing of code in i.MXS
SoCs
mxs: prefix register acessor macros with 'mxs' prefix
mxs: prefix register structs with 'mxs' prefix
mxs: Reowork SPL to use 'mxs' prefix for methods
mxs: Clarify why we poweroff in case of brownout in 5v conflict
mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs
sc_sps_1: Adjust board config to use 'mxs' SoC code
Stathis Voukelatos (1):
i.MX28: bug fixes in PMU configuration code
Stefano Babic (1):
MX5: mx53loco: do not overwrite the console
Veli-Pekka Peltola (1):
Add support for Bluegiga APX4 Development Kit
MAINTAINERS | 5 +
Makefile | 2 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile | 2 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c | 40 +--
arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} | 72 +++--
.../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} | 14 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c | 20 +-
.../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c | 10 +-
.../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c | 64 ++---
.../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c | 274
++++++++++----------
arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S | 0
arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c | 8 +-
.../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds | 2 +-
.../arm/cpu/arm926ejs/mxs}/u-boot.bd | 0
arch/arm/cpu/armv7/imx-common/cpu.c | 4 +-
.../include/asm/{arch-mx28 => arch-mxs}/clock.h | 0
arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h | 0
.../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h | 0
.../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/iomux.h | 0
.../asm/{arch-mx28 => arch-mxs}/regs-apbh.h | 256
+++++++++---------
.../asm/{arch-mx28 => arch-mxs}/regs-base.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h | 44 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h | 60 ++---
.../asm/{arch-mx28 => arch-mxs}/regs-common.h | 34 +--
.../asm/{arch-mx28 => arch-mxs}/regs-digctl.h | 56 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h | 28 +-
.../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h | 30 +--
.../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h | 66 ++---
.../asm/{arch-mx28 => arch-mxs}/regs-lradc.h | 50 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h | 88 +++----
.../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h | 170 ++++++------
.../asm/{arch-mx28 => arch-mxs}/regs-power.h | 30 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h | 30 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h | 42 +--
.../asm/{arch-mx28 => arch-mxs}/regs-timrot.h | 40 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h | 2 +-
.../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h | 22 +-
.../asm/{arch-mx28 => arch-mxs}/sys_proto.h | 10 +-
board/bluegiga/apx4devkit/Makefile | 47 ++++
board/bluegiga/apx4devkit/apx4devkit.c | 150 +++++++++++
board/bluegiga/apx4devkit/spl_boot.c | 164 ++++++++++++
board/denx/m28evk/m28evk.c | 4 +-
board/denx/m28evk/spl_boot.c | 2 +-
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx28evk/u-boot.bd | 14 -
board/freescale/mx51evk/mx51evk.c | 10 +-
board/freescale/mx53loco/mx53loco.c | 12 +-
board/schulercontrol/sc_sps_1/Makefile | 47 ++++
board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++++++++
board/schulercontrol/sc_sps_1/spl_boot.c | 165 ++++++++++++
board/ttcontrol/vision2/vision2.c | 11 +-
boards.cfg | 6 +-
doc/README.m28 | 4 +-
doc/README.mx28evk | 4 +-
drivers/dma/apbh_dma.c | 32 +--
drivers/gpio/mxs_gpio.c | 16 +-
drivers/i2c/mxs_i2c.c | 12 +-
drivers/mmc/mxsmmc.c | 202 ++++++++-------
drivers/mtd/nand/mxs_nand.c | 12 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/imxdi.c | 244 +++++++++++++++++
drivers/rtc/mxsrtc.c | 6 +-
drivers/spi/mxs_spi.c | 200 +++++++++++---
drivers/usb/host/ehci-mxs.c | 24 +-
include/configs/apx4devkit.h | 238 +++++++++++++++++
include/configs/m28evk.h | 4 +-
include/configs/mx28evk.h | 6 +-
include/configs/mx51evk.h | 2 +
include/configs/mx53loco.h | 2 +
include/configs/sc_sps_1.h | 208 +++++++++++++++
include/configs/vision2.h | 2 +
75 files changed, 2569 insertions(+), 982 deletions(-)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%)
rename arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (79%)
rename arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} (81%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (90%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (100%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (95%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%)
rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mxs}/u-boot.bd (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux-mx28.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-apbh.h (77%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-base.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-bch.h (92%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h (88%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h (77%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h (95%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h (94%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lcdif.h (84%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lradc.h (96%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h (71%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h (93%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-power.h (97%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h (91%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h (95%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-timrot.h (90%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (89%)
create mode 100644 board/bluegiga/apx4devkit/Makefile
create mode 100644 board/bluegiga/apx4devkit/apx4devkit.c
create mode 100644 board/bluegiga/apx4devkit/spl_boot.c
delete mode 100644 board/freescale/mx28evk/u-boot.bd
create mode 100644 board/schulercontrol/sc_sps_1/Makefile
create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
create mode 100644 drivers/rtc/imxdi.c
create mode 100644 include/configs/apx4devkit.h
create mode 100644 include/configs/sc_sps_1.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-08-10 6:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 16:00 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
2012-08-10 6:54 ` Stefano Babic [this message]
2012-08-13 23:06 ` [U-Boot] [GIT PULL] [Update] " Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5024B00E.1070208@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox