[U-Boot] [PATCH] fsl_esdhc: Add no-snoop config for default init

[stefano babic <sbabic@denx.de>]

Am 11/08/2012 19:59, schrieb Beno?t Th?baudeau:
> Hi Stefano,
> 

Hi Beno?t,


> That could be a solution. However, that would have to be done for i.MX25 and
> i.MX35 too (I have patches to add/fix eSDHC support for these that I will post
> shortly), which means more duplicated code that should rather be centralized
> somewhere.

Ok, I'll wait for your patches ;-)

> 
>>> On i.MX, the patch could also be improved by not making this option
>>> available,
>>> but behaving as if it were set.
>>
>> Right. It should not be configurable. We know that the i.MXs have no
>> snoop cabability.
> 
> The solution I would like would be to have some automatic ARCH_IMX (or ARCH_MXC)
> config like on Linux. Then the fsl_esdhc driver could use this config to remove
> all cache snooping stuff from its code and from struct fsl_esdhc_cfg.
> 
> The i.MX board files would have to be updated to no longer refer to the no_snoop
> field. struct fsl_esdhc_cfg would then have only one field for i.MX, but this is
> not really an issue.

Yes, this is no an issue.

> 
> ARCH_IMX could be defined in all imx-regs.h files. Or the fsl_esdhc driver could
> simply use a #if testing all the supported CONFIG_MX*.

Let the fsl_edhc checking for CONFIG_MX* results clear for us today, but
nobody will remember after some times and if the checked CONFIG_MX* will
be changed, it will have drawbacks not so evident on MMC. I prefer the
first solution, adding an entry to imx-regs.h.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================