* [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection
@ 2012-08-09 6:18 Anatolij Gustschin
2012-08-13 12:48 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Anatolij Gustschin @ 2012-08-09 6:18 UTC (permalink / raw)
To: u-boot
Erasing flash sectors protected with persistent protection bit (PPB)
mechanism on Spansion flash chips doesn't work. Add sector protection
status checking and sector lock and unlock commands to fix this.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
---
drivers/mtd/cfi_flash.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++
include/mtd/cfi_flash.h | 7 ++++++
2 files changed, 59 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 35294bc..50df9b0 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1447,6 +1447,47 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
0, ATM_CMD_UNLOCK_SECT);
}
}
+ if (info->manufacturer_id == (uchar)AMD_MANUFACT) {
+ int flag = disable_interrupts();
+ int lock_flag;
+
+ flash_unlock_seq(info, 0);
+ flash_write_cmd(info, 0, info->addr_unlock1,
+ AMD_CMD_SET_PPB_ENTRY);
+ lock_flag = flash_isset(info, sector, 0, 0x01);
+ if (prot) {
+ if (lock_flag) {
+ flash_write_cmd(info, sector, 0,
+ AMD_CMD_PPB_LOCK_BC1);
+ flash_write_cmd(info, sector, 0,
+ AMD_CMD_PPB_LOCK_BC2);
+ }
+ debug("sector %ld %slocked\n", sector,
+ lock_flag ? "" : "already ");
+ } else {
+ if (!lock_flag) {
+ debug("unlock %ld\n", sector);
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_PPB_UNLOCK_BC1);
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_PPB_UNLOCK_BC2);
+ }
+ debug("sector %ld %sunlocked\n", sector,
+ !lock_flag ? "" : "already ");
+ }
+ if (flag)
+ enable_interrupts();
+
+ if (flash_status_check(info, sector,
+ info->erase_blk_tout,
+ prot ? "protect" : "unprotect"))
+ printf("status check error\n");
+
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_SET_PPB_EXIT_BC1);
+ flash_write_cmd(info, 0, 0,
+ AMD_CMD_SET_PPB_EXIT_BC2);
+ }
break;
#ifdef CONFIG_FLASH_CFI_LEGACY
case CFI_CMDSET_AMD_LEGACY:
@@ -1635,6 +1676,17 @@ static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
cmdset_amd_read_jedec_ids(info);
flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+#ifdef CONFIG_SYS_FLASH_PROTECTION
+ if (info->ext_addr && info->manufacturer_id == (uchar)AMD_MANUFACT) {
+ ushort spus;
+
+ /* read sector protect/unprotect scheme */
+ spus = flash_read_uchar(info, info->ext_addr + 9);
+ if (spus == 0x8)
+ info->legacy_unlock = 1;
+ }
+#endif
+
return 0;
}
diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h
index 3245b44..966b5e0 100644
--- a/include/mtd/cfi_flash.h
+++ b/include/mtd/cfi_flash.h
@@ -60,6 +60,13 @@
#define AMD_CMD_UNLOCK_ACK 0x55
#define AMD_CMD_WRITE_TO_BUFFER 0x25
#define AMD_CMD_WRITE_BUFFER_CONFIRM 0x29
+#define AMD_CMD_SET_PPB_ENTRY 0xC0
+#define AMD_CMD_SET_PPB_EXIT_BC1 0x90
+#define AMD_CMD_SET_PPB_EXIT_BC2 0x00
+#define AMD_CMD_PPB_UNLOCK_BC1 0x80
+#define AMD_CMD_PPB_UNLOCK_BC2 0x30
+#define AMD_CMD_PPB_LOCK_BC1 0xA0
+#define AMD_CMD_PPB_LOCK_BC2 0x00
#define AMD_STATUS_TOGGLE 0x40
#define AMD_STATUS_ERROR 0x20
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection
2012-08-09 6:18 [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection Anatolij Gustschin
@ 2012-08-13 12:48 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2012-08-13 12:48 UTC (permalink / raw)
To: u-boot
On 08/09/2012 08:18 AM, Anatolij Gustschin wrote:
> Erasing flash sectors protected with persistent protection bit (PPB)
> mechanism on Spansion flash chips doesn't work. Add sector protection
> status checking and sector lock and unlock commands to fix this.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Stefan Roese <sr@denx.de>
Applied to u-boot-cfi-flash/master. Thanks.
Best regards,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-08-13 12:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-09 6:18 [U-Boot] [PATCH] cfi_flash: add support for Spansion flash PPB sector protection Anatolij Gustschin
2012-08-13 12:48 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox