From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 14 Aug 2012 14:16:56 +0200
Subject: [U-Boot] [PATCH 4/4] xilinx: Add new Zynq board
In-Reply-To: <1344944567-1694-5-git-send-email-monstr@monstr.eu>
References: <1344944567-1694-1-git-send-email-monstr@monstr.eu>
	<1344944567-1694-5-git-send-email-monstr@monstr.eu>
Message-ID: <502A41B8.9070206@monstr.eu>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 08/14/2012 01:42 PM, Michal Simek wrote:
> Add support for Xilinx Zynq board.
>
> Signed-off-by: Michal Simek <monstr@monstr.eu>
> ---
>   board/xilinx/zynq/Makefile        |   57 +++++++++++++++++++++++++++++++++
>   board/xilinx/zynq/board.c         |   64 +++++++++++++++++++++++++++++++++++++
>   board/xilinx/zynq/lowlevel_init.S |   27 +++++++++++++++
>   boards.cfg                        |    1 +
>   4 files changed, 149 insertions(+), 0 deletions(-)
>   create mode 100644 board/xilinx/zynq/Makefile
>   create mode 100644 board/xilinx/zynq/board.c
>   create mode 100644 board/xilinx/zynq/lowlevel_init.S


oops. I forget to add also config file.
Will send v2 patch.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian