[U-Boot] [PATCH] kw_spi: fix clock prescaler computation

[Valentin Longchamp <valentin.longchamp@keymile.com>]

Hi Prafulla,

On 08/14/2012 03:15 PM, Prafulla Wadaskar wrote:
> 
> 
>> -----Original Message-----
>> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
>> Sent: 14 August 2012 15:02
>> To: Prafulla Wadaskar
>> Cc: u-boot at lists.denx.de; Holger Brunck
>> Subject: Re: [PATCH] kw_spi: fix clock prescaler computation
>>
>> Hi Prafulla,
>>
>> I haven't received feedback about this patch from you. Can I please
>> kindly
>> remind you about it since I am about to send patches that deal with
>> SPI clk setting.
> 
> Dear Valentin
> My bad :-( I am really sorry about this.
> I missed this patch.
> Please find my comments in lined.
> 
>>
>> Thank you.
>>
>> On 06/29/2012 02:17 PM, Valentin Longchamp wrote:
>>> The computation was not correct with low clock values: setting a
>> 1MHz
>>> clock would result in an overlap that would then configure a 25Mhz
>>> clock.
>>>
>>> This patch implements a correct computation method according to the
>>> kirkwood functionnal spec. table 629 (Serial Memory Interface
>>> Configuration Register).
> 
> I think this is table 600 (ref: MV-S104860-00 Rev. E specs available on extranet)
> This is a cosmetic change.
> 
> Otherwise I ack for this patch.
> 
> Please kindly let me know, should I pull this patch or you will resend it with above change?

Ok, I had taken rev. C of the document as a reference, I will resend the patch
with the updated commit message.

Valentin