From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-1?Q?Andreas_Bie=DFmann?= <andreas.devel@googlemail.com>
Date: Thu, 16 Aug 2012 09:37:55 +0200
Subject: [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash
In-Reply-To: <502C9DD3.1020500@atmel.com>
References: <1345092267-16077-1-git-send-email-voice.shen@atmel.com>
	<502C9DD3.1020500@atmel.com>
Message-ID: <502CA353.502@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Bo,

On 16.08.2012 09:14, Bo Shen wrote:
> Hi Andreas,
> 
> On 8/16/2012 12:44, Bo Shen wrote:
>> This series patches enable at91sam9x5 boot from serial flash
>>
>> Bo Shen (3):
>>    spi: add atmel at25db321 serial flash support
>>    arm : at91sam9x5 : enable serial flash boot
>>    arm : at91sam9x5 : make nand available when not boot from nand
>>
> 
> Please don't take this serial patches.
> I found the spi only works at 1MHz speed which is too slow.
> I will resend it let it work at a higher speed.

Ok, please split 2/3 into a 'fix spi' and a 'enable spi for <board>'

Best regards

Andreas Bie?mann