[U-Boot] [PATCH 2/2] MX28: Move "regs-base.h" include after SoC type configuration

[Stefano Babic <sbabic@denx.de>]

On 15/08/2012 20:51, Otavio Salvador wrote:
> For i.MX233 addition the base registers need to be change so the SoC
> definition needs to be known before the header include.
> 
> The following boards has been changed:
> 
>  * apx4devkit
>  * m28evk
>  * mx28evk
>  * sc_sps_1
> 
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
>  include/configs/apx4devkit.h |    4 ++--
>  include/configs/m28evk.h     |    4 ++--
>  include/configs/mx28evk.h    |    5 +++--
>  include/configs/sc_sps_1.h   |    4 ++--
>  4 files changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
> index b5ae44f..af0b714 100644
> --- a/include/configs/apx4devkit.h
> +++ b/include/configs/apx4devkit.h
> @@ -22,8 +22,6 @@
>  #ifndef __CONFIG_H
>  #define __CONFIG_H
>  
> -#include <asm/arch/regs-base.h>

We use the same "trick" for i.MX5.

You miss Veli-Pekka as maintainer for apx4devkit, I have added it, but
you get here my:

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================